OnCourse Software

Hello,

I'm back into FSX and I have reinstalled - not without problems - PFE to version 2.14. Have read along the forum topics and found valuable info when reinstalling.
My problem now is that my flightplans (saved in fsbuild 2.4 or fsc 9) after compiling give just one altitude(for ex. 10000 ft) along the route, though I put 34000 ft in proflight's altitude box.
My system is W7 64 bit. I saw the vista 64 bit patch and applied it.
I read also about adjusting the alt settings in the proflight compiler, but that makes no difference.

So, any help to resolve this problem would be very much appreciated.

Kind regards,

Jos
EBBR

have you tried changing the PC to english settings,i believe the decimal point caused issues...

Hi Dave,

No I didn't. I changed it and everything returned to normal.

Many thanks for your help.

Jos Denis

Hello,

I have installed PFE to version 2.14. Have read along the forum topics and found valuable info.
My problem now is that my flightplans (saved in fsc 9) after successful converting to PF2000 not all compiling with pf2000.
Some FP compiled correct:
expl:
[Flightplan]
AppVersion=9.1.40901
title=EBBR to EGNH
description=EBBR, EGNH
type=IFR
routetype=1
cruising_altitude=34000
departure_id=EBBR, N50* 53.63', E004* 30.10', +000184.00
departure_position=07R
destination_id=EGNH, N53* 46.29', W003* 01.71', +000033.00
departure_name=Brussels National
destination_name=Blackpool
alternate_name=
waypoint.0=EBBR, A, N50* 53.63', E004* 30.10', +000184.00,
waypoint.1=DENUT, I, N51* 14.16', E003* 39.45', +000000.00,
waypoint.2=LUMEN, I, N51* 16.16', E003* 24.40', +000000.00,
waypoint.3=BULAM, I, N51* 21.15', E002* 45.01', +000000.00,
waypoint.4=DIBLI, I, N51* 24.71', E002* 15.75', +000000.00,
waypoint.5=RAPIX, I, N51* 26.63', E002* 00.00', +000000.00,
waypoint.6=TEBRA, I, N51* 29.33', E001* 36.71', +000000.00,
waypoint.7=KOPUL, I, N51* 32.53', E001* 08.23', +000000.00,
waypoint.8=GILDA, I, N51* 36.09', E000* 35.01', +000000.00,
waypoint.9=FERIT, I, N51* 37.98', E000* 32.35', +000000.00,
waypoint.10=WESUL, I, N51* 40.25', E000* 29.15', +000000.00,
waypoint.11=STOAT, I, N52* 01.55', W000* 01.25', +000000.00,
waypoint.12=MOGLI, I, N52* 18.50', W000* 16.15', +000000.00,
waypoint.13=LESTA, I, N52* 44.45', W001* 04.31', +000000.00,
waypoint.14=TUMTI, I, N53* 04.66', W001* 36.25', +000000.00,
waypoint.15=RODOL, I, N53* 14.28', W001* 51.71', +000000.00,
waypoint.16=KOLID, I, N53* 34.43', W002* 45.35', +000000.00,
waypoint.17=EGNH, A, N53* 46.29', W003* 01.71', +000033.00,

Sometimes compiling stops at process step:"Inserting step climbs"
expl.:
[Flightplan]
AppVersion=9.1.40901
title=ESPA to ENDU
description=ESPA, ENDU
type=IFR
routetype=1
cruising_altitude=34000
departure_id=ESPA, N65* 32.62', E022* 07.31', +000066.00
departure_position=14
destination_id=ENDU, N69* 03.34', E018* 32.41', +000249.00
departure_name=Kallax Ab
destination_name=Bardufoss Ab
alternate_name=
waypoint.0=ESPA, A, N65* 32.62', E022* 07.31', +000066.00,
waypoint.1=BESLA, I, N65* 51.45', E022* 18.61', +000000.00,
waypoint.2=ASKEB, I, N66* 24.37', E023* 16.96', +000000.00,
waypoint.3=MAGON, I, N66* 44.11', E023* 53.53', +000000.00,
waypoint.4=ABKUR, I, N66* 57.60', E024* 14.73', +000000.00,
waypoint.5=SUDIP, I, N67* 27.25', E025* 03.00', +000000.00,
waypoint.6=SUPOX, I, N68* 18.18', E026* 31.78', +000000.00,
waypoint.7=OLAXU, I, N68* 27.23', E027* 27.08', +000000.00,
waypoint.8=SUKIS, I, N68* 27.88', E027* 40.01', +000000.00,
waypoint.9=KELEK, I, N68* 30.20', E028* 27.49', +000000.00,
waypoint.10=ENEXI, I, N69* 19.85', E025* 45.16', +000000.00,
waypoint.11=ATA, I, N69* 58.65', E023* 22.30', +000000.00,
waypoint.12=RATUL, I, N69* 57.11', E022* 00.18', +000000.00,
waypoint.13=HTK, I, N69* 55.58', E021* 00.18', +000000.00,
waypoint.14=ALOPA, I, N69* 35.90', E020* 00.00', +000000.00,
waypoint.15=TULDA, I, N69* 14.62', E018* 58.05', +000000.00,
waypoint.16=ENDU, A, N69* 03.34', E018* 32.41', +000249.00,

I can't see any format differences between both FP. The settings in PF2000 aren't change.

My system is W7 64 bit. I saw the vista 64 bit patch and applied it.
I read also about adjusting the alt settings in the proflight compiler, but that makes no difference.

So, any help to resolve this problem would be very much appreciated

Detlef

Have you watched my tutorial videos regarding PFE.

Where have you installed PFE?

Have re-installed the cumulative updater?

Did you install PFE with AV and Firewall turned off,you don't need to be connected to the internet for this.

What Flightplanner do you use?

You don't need to apply the "Vista" patch..