OnCourse Software

Welcome to our Product Support Forums

error 52

Post Reply   Page 1 of 1  [ 10 posts ]
Author Message
starcd53
Post subject: error 52
Posted: Thu Oct 24, 2013 11:37 pm
Offline
 
Posts: 8
Joined: Thu Oct 24, 2013 11:07 pm
 
I am flying from KLAX IN A 737-700 in MegaSceneryEarth CALIFORNIA 1.0 to KLAS in MegaSceneryEarth NEVADA 2.0. I am also using FDC in this flight. My flight altitude is 29,000 feet. Everything seems to be going fine until I cross from MegaSceneryEarth CALIFORNIA 1.0 into MegaSceneryEarth 2.0 Nevada 2.0 and begin my decent into KLAS. At that moment everything freezes. Moments later FSX aborts and I see a screen that identifies itself as this: Flightdeck Companion

underneath is this message: error 52 - Bad file name or number in 'updateBlackbox' routine 0

This message is all in a blue box.

Now, I also try this same flight without FDC engaged and the flight proceeds very smoothly all the way including the landing at KLAS.

To make sure that this is FDC problem I have done this flight 10 exact times with the exact same results every time, both with and without FDC activated and came up with the same results.
I have also done the same thing with other flights too.

What is error 52?

What am I doing wrong to cause this error?


Top
Profile Quote
Dave Leesley
Post subject: Re: error 52
Posted: Sat Oct 26, 2013 7:26 pm
Offline
 
Posts: 1329
Joined: Fri May 22, 2009 8:27 pm
Location: Yorkshire
 
Is this the first time using FDC,as it done this at other scenery,are you running latest version 3.14.

What aircraft are you using and profile,what other messages if any.

(it should have read 3.84 not 3.14 error on my part)

_________________

Regards Dave
Forum Moderator

[ img ]
[ img ]


Top
Profile Quote
starcd53
Post subject: Re: error 52
Posted: Sat Oct 26, 2013 8:59 pm
Offline
 
Posts: 8
Joined: Thu Oct 24, 2013 11:07 pm
 
This is NOT the first time using FDC. I have used it for years. This only happens on long flights.
I am using the latest FDC Version 3.79.
I am also using the latest registered FSUIPC4 Version 9.21f by Pete Dawson.

Here is my FSX Configuration File:
[SOUND]
AmbientUIMusicVolume=-6.000000
SOUND_FADER1=0.500000
SOUND_FADER2=0.500000
SOUND_FADER3=0.500000
SOUND_FADER4=0.500000
AmbientUIMusic=FSX01
SOUND=1
SOUND_QUALITY=2
SOUND_LOD=0
UISound=1
AmbientUI=0
PrimaryDevice={C63521A2-7F79-4C90-8E4A-373B2574506D}
VoiceDevice={C63521A2-7F79-4C90-8E4A-373B2574506D}
[Display]
ChangeTime=4.000000
TransitionTime=4.000000
ActiveWindowTitleTextColor=255,255,255
ActiveWindowTitleBackGroundColor=0,28,140,64
NonActiveWindowTitleTextColor=255,255,255
NonActiveWindowTitleBackGroundColor=24,33,87,64
InfoUpperRightTextColor=255,0,0
InfoUpperRightBackGroundColor=0,0,0,0
InfoLowerLeftTextColor=255,255,255
InfoLowerLeftBackGroundColor=255,0,0,128
InfoLowerRightTextColor=255,255,255
InfoLowerRightBackGroundColor=255,0,0,128
InfoBrakesEnable=True
InfoParkingBrakesEnable=True
InfoPauseEnable=True
InfoSlewEnable=True
InfoStallEnable=True
InfoOverspeedEnable=True
BLOOM_EFFECTS=0
RUNWAY_LIGHTS_SURFACE_SCALAR=2.0
RUNWAY_LIGHTS_VASI_SCALAR=1.5
RUNWAY_LIGHTS_APPROACH_SCALAR=2.5
RUNWAY_LIGHTS_STROBE_SCALAR=2.5
SKINNED_ANIMATIONS=1
TEXTURE_BANDWIDTH_MULT=50
UPPER_FRAMERATE_LIMIT=0
WideViewAspect=True
TextureMaxLoad=30
[Main]
HideInfoText=0
User Objects=Airplane
SimObjectPaths.0=SimObjects\Airplanes
SimObjectPaths.1=SimObjects\Rotorcraft
SimObjectPaths.2=SimObjects\GroundVehicles
SimObjectPaths.3=SimObjects\Boats
SimObjectPaths.4=SimObjects\Animals
SimObjectPaths.5=SimObjects\Misc
SimObjectPaths.6=SimObjects\TrafficX
Maximized=1
Location=440,130,1480,908,\\.\DISPLAY1
HideMenuNormal=0
HideMenuFullscreen=1
ProcSpeed=10415
PerfBucket=7
FIBER_FRAME_TIME_FRACTION=0.43
[JobScheduler]
AffinityMask=6
HIGHMEMFIX=1
[PANELS]
IMAGE_QUALITY=1
QUICKTIPS=0
PANEL_OPACITY=100
PANEL_MASKING=1
PANEL_STRETCHING=1
UNITS_OF_MEASURE=0
DEFAULT_VIEW=1
[Weather]
WindshieldPrecipitationEffects=1
MinGustTime=10
MaxGustTime=500
MinGustRampSpeed=1
MaxGustRampSpeed=200
MinVarTime=5
MaxVarTime=50
MinVarRampSpeed=10
MaxVarRampSpeed=75
TurbulenceScale=1.000000
WeatherServerAddress=fs2k.zone.com
WeatherServerPort=80
WeatherGraphDataInDialog=0
AdjustForMagVarInDialog=1
DynamicWeather=2
DownloadWindsAloft=1
DisableTurbulence=0
CLOUD_DRAW_DISTANCE=6
DETAILED_CLOUDS=1
CLOUD_COVERAGE_DENSITY=7
THERMAL_VISUALS=0
[DISPLAY.Device.AMD Radeon HD 6900 Series.0]
Mode=1920x1080x32
Anisotropic=1
AntiAlias=1
AMD_Radeon_HD_6900_CrossFire=1
AMD_Radeon_HD_6900_CrossFire_Graphics_Enable=1
[CONTROLS]
Controls_Default=Standard
Controls_Current=Standard
force_master_gain=10000
force_stick_force_enabled=0
force_stick_shaker_enabled=0
force_gear_bump_enabled=0
force_crash_enabled=0
force_ground_bumps_enabled=0
KBDAIL=64
KBDELEV=64
KBDRUD=64
[TextInfo.1]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
WindDirectionAndSpeed=1,6
[TextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
GForce=1,3
FuelPercentage=1,4
[TextInfo.3]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
WindDirectionAndSpeed=1,6
FrameRate=2,1
LockedFrameRate=2,2
GForce=2,3
FuelPercentage=2,4
[SlewTextInfo.1]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
[SlewTextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
[SlewTextInfo.3]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
FrameRate=2,1
LockedFrameRate=2,2
[DynamicHeadMovement]
LonAccelOnHeadLon=-0.020000
LonAccelOnHeadPitch=-0.010000
RollAccelOnHeadLat=0.010000
YawAccelOnHeadLat=-0.100000
RollAccelOnHeadRoll=0.100000
MaxHeadAngle=5.000000
MaxHeadOffset=0.300000
HeadMoveTimeConstant=1.000000
[VirtualCopilot]
VirtualCopilotActive=0
[GRAPHICS]
SHADER_CACHE_PRIMED=1693458432
TEXTURE_MAX_LOAD=4096
NUM_LIGHTS=8
AIRCRAFT_SHADOWS=1
AIRCRAFT_REFLECTIONS=0
COCKPIT_HIGH_LOD=0
LANDING_LIGHTS=1
AC_SELF_SHADOW=0
EFFECTS_QUALITY=2
GROUND_SHADOWS=0
TEXTURE_QUALITY=3
IMAGE_QUALITY=0
See_Self=1
Text_Scroll=1
SHADER_CACHE_PRIMED_10=1693458432
D3D10=0
HIGHMEMFIX=1
ForceFullScreenVSync=1
[USERINTERFACE]
PageID=6
SHOW_MISSION_CAPTIONS=0
PAUSE_ON_LOST_FOCUS=1
PROMPT_ON_EXIT=1
SITUATION=FLIGHTS\OTHER\FLTSIM
Map_Orientation=2
ShowAllACPaintSchemes=1
SelectAircraftManufacturer=All
SelectAircraftPublisher=All
SelectAircraftType=All
OpenATCOnCreate=1
DisplayFuelAsWeight=0
[ATC]
ShowATCText=1
COMM_MSG_NONE_COLOR=FFFFFFFF
COMM_MSG_ATC_USER_COLOR=FFB6FFB6
COMM_MSG_USER_ATC_COLOR=FFFFD21B
COMM_MSG_ATC_AI_COLOR=FF00FF00
COMM_MSG_AI_ATC_COLOR=FFFF7840
AutoOpenAirTrafficWindow=1
UsePilotVoice=1
PilotVoice=0
[PointOfInterestSystem]
CycleSetting=0
[SCENERY]
LENSFLARE=1
DAWN_DUSK_SMOOTHING=1
IMAGE_COMPLEXITY=5
SmallPartRejectRadius=10
[TrafficManager]
AirlineDensity=85
GADensity=75
FreewayDensity=50
ShipsAndFerriesDensity=100
LeisureBoatsDensity=100
IFROnly=0
AIRPORT_SCENERY_DENSITY=5
[TERRAIN]
LOD_RADIUS=11.000000
MESH_COMPLEXITY=81
MESH_RESOLUTION=23
TEXTURE_RESOLUTION=25
AUTOGEN_DENSITY=5
DETAIL_TEXTURE=1
WATER_EFFECTS=5
TERRAIN_MAX_AUTOGEN_TREES_PER_CELL=4500
TERRAIN_MAX_AUTOGEN_BUILDINGS_PER_CELL=3000
[AContain]
ShowLabels=1
ShowUserLabel=0
ShowLabelManufacturer=1
ShowLabelModel=1
ShowLabelTailNumber=0
ShowLabelDistance=1
ShowLabelAltitude=1
ShowLabelAirline=0
ShowLabelAirlineAndFlightNumber=0
ShowLabelFlightPlan=0
ShowLabelContainerId=0
ShowLabelAirspeed=0
ShowLabelHeading=0
LabelDelay=1000
LabelColor=FFFF0000
[INTERNATIONAL]
ASLAT=2
ASLON=1
MEASURE=0
[REALISM]
PFactor=0.500000
Torque=0.500000
GyroEffect=0.500000
CrashTolerance=0.000000
General=0.500000
UnlimitedFuel=False
TrueAirspeed=False
AutoCoord=True
RealMixture=False
StressDamage=False
GEffect=False
ManualLights=True
GyroDrift=False
CrashWithDyn=False
CrashDetection=False
AutoTrim=False
[SIM]
SYSCLOCK=1
[STARTUP]
DEMO=0
SHOW_OPENING_SCREEN=1
STARTUP_DEMO=
LoadWindow=1
[FACILITIES]
COUNTRY=United States
STATE=Washington
CITY=Seattle
GTL_BUTTON=1232
[Misc]
Com_Rate=7
[Trusted]
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Abacus B787.GAU.koniabhuebiacwqaerrtbtbiwenqzucbnrewiali=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\737-400.DLL.wzhzzwtllwrcuotrqckurzzhqriwkobltwhuokoo=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\fmc.GAU.brertnkhoblzctacqhlqazuiccrquocozbikuwhk=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.dll.lkawnnbatoakqwolekqlhhhabbbhkzlunohizaoh=1
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\CLS_FSX_SOUND.DLL.aebihneutthwzhqrahutzwhwethonwcezhwrckbl=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\CLS_FSX_TCAS.DLL.wetiteelzzrnlehqeeizcoenbqqrrretnraqlkzh=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\CLS_767.GAU.ibeteuitcbnweztiioreiziilbeqeiwrnakkntut=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\bglmanx.dll.zizzwchnelobcztalrnonbuqbnotonblbkhaburk=1
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Qw757.GAU.eonctubctlaaqhekbruqkkekuibiehkwkoawelti=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Qw757_TCAS.GAU.lezczqbqwilekwoububwrcrtuowhlrztuqkenkqw=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\mooney_bravo.DLL.zhqlazqlrehbzleeltbzahhbwiukoalqbihnkuqi=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DC-10-30 Omni\panel\md11engine.GAU.ubchhqrezhlecwlwhbnlawrtorccotwqkchketkh=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DC-10-30 Omni\panel\md11oilset.GAU.kclikchlcbuzqutbetqoohzlaecqwokqtbtiuqlk=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\kingair.DLL.qniluuabnzuhtterhceqqwitntbwtwholbokobir=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DC-10-30 United Airlines\panel\md11engine.GAU.ubchhqrezhlecwlwhbnlawrtorccotwqkchketkh=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DC-10-30 United Airlines\panel\md11oilset.GAU.kclikchlcbuzqutbetqoohzlaecqwokqtbtiuqlk=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DC-10-30 F\panel\md11engine.GAU.ubchhqrezhlecwlwhbnlawrtorccotwqkchketkh=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DC-10-30 F\panel\md11oilset.GAU.kclikchlcbuzqutbetqoohzlaecqwokqtbtiuqlk=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Cessna.DLL.znwqkcklztbhhnrnniarzcbetrhcrknbulzlhzhc=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Cessna172.DLL.ttewiokwaowqonnilrqcnkhcwktlowwwwbuqukhb=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Cessna182s.DLL.toorcrbllklnhcnknlkwnznlkaebelhkaazlqnwn=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\CessnaWAlpha.DLL.kziretzcwiqleucweltbuokekahkeohneaqiikqh=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Bendix_King_Radio.DLL.ezqinrnnlkkzqezbbathqrlzeiwtwceeoznnehbl=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Bell_206B.DLL.zeuwekwncnuhlekqnckcrbuokubwborcbqelhhww=2
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\GAUGES\Magnetic_Compass.DLL.hteohhukioaliqtnnhqawhtoqiahtiztweneknac=2
C:\Program Files (x86)\FlightSimTools.com\TaxiSigns HD\TaxiSignsFSX.dll.nohqwueiqnraqtizzinciqwhwzaruceukurwckkt=1
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.dll.hhkwccnuooclqieabnrcliqkbziqqcaunewcbhhr=1
[FlightPlanMapMAP]
LineWidth=2
SHOW_AIRPORTS=1
SHOW_VORS=0
SHOW_NDBS=1
SHOW_APPROACHES=1
SHOW_INTERSECTIONS=1
SHOW_VICTOR=1
SHOW_JET=0
SHOW_AIRSPACE=1
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=1
SHOW_WEATHERSYSTEMS=1
SHOW_DATATAGS=1
SHOW_TERRAIN=1
show_flight_history=1
show_waypoints=1
show_airways=1
show_markers=1
show_volume_boundaries=1
[FlightPlanMap]
LineWidth=2
SHOW_AIRPORTS=1
SHOW_VORS=1
SHOW_NDBS=1
SHOW_APPROACHES=1
SHOW_INTERSECTIONS=1
SHOW_VICTOR=0
SHOW_JET=0
SHOW_AIRSPACE=1
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=1
SHOW_WEATHERSYSTEMS=1
SHOW_DATATAGS=1
SHOW_TERRAIN=1
show_waypoints=1
show_airways=1
show_markers=1
show_volume_boundaries=1
show_ac_twr=1
[MAPVIEW_MAP]
SHOW_AIRPORTS=1
SHOW_VORS=1
SHOW_NDBS=1
SHOW_APPROACHES=1
SHOW_INTERSECTIONS=0
SHOW_VICTOR=0
SHOW_JET=0
SHOW_AIRSPACE=1
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=1
SHOW_WEATHERSYSTEMS=1
SHOW_DATATAGS=1
SHOW_TERRAIN=1
show_flight_history=1
[FSDREAMTEAM]
AntiPopUp=1
AltitudeCull=1
[MULTIPLAYER]
condAccoutPassword=0

Would you like the specs of my computer also?


Top
Profile Quote
Dave Leesley
Post subject: Re: error 52
Posted: Sat Oct 26, 2013 9:47 pm
Offline
 
Posts: 1329
Joined: Fri May 22, 2009 8:27 pm
Location: Yorkshire
 
Ok,you are not using the latest version of FDC and fsuipc.

The latest version is 3.84 not 3.14 as i stated earlier got confused with PFE, i apologise for that error on my part.

Please go to the link in this forum for the cumulative updater and that should solve your problem,also please avoid using block caps ie:NOT as it is deemed as shouting!

Also fsuipc is out of date

Where is FDC installed,hopefully not in C:/Program Files

_________________

Regards Dave
Forum Moderator

[ img ]
[ img ]


Top
Profile Quote
starcd53
Post subject: Re: error 52
Posted: Sat Oct 26, 2013 10:16 pm
Offline
 
Posts: 8
Joined: Thu Oct 24, 2013 11:07 pm
 
What is the latest fsuipc version Please, as I went to Peter Dawson's site and was told this was the latest version 9.21f and paid for that registered key also.

Exactly where do I also find the newest version FDC 3.84, as I cannot upload it from my 3.79 version I have now, as it tells me I already have the latest version and there is no further upgrades at this time?

Also FDC is located here: C:\Program Files (86) Aerosoft) FDC

I hope my fsx.cfg was not too complicated to cause other problems.

Appreciate all your help.......


Top
Profile Quote
pasterke
Post subject: Re: error 52
Posted: Sun Oct 27, 2013 7:32 am
Offline
 
Posts: 232
Joined: Wed May 20, 2009 6:11 am
 
- in fact the latest Fsuipc version is 4.921f

- top of the forum :The latest accumulative update installer is available here viewtopic.php?f=5&t=391

- Dave March quote :


Please download and instal the latest cumulative updates package from our support forum, when installing please ensure you stop ALL other programs, especially your anti virus and any other security type programs you might have.

If you're running Windows Vista or later do NOT instal into the default "c:/program files" folder, because Windows regards that as a protected area and will prevent certain files being written and/or updated. I appreciate the installer defaults to that location but the publisher wrote the instal script long before Vista hit the shelves

Hope that helps

_________________

Regards,

patrick

[ img ]
[ img ][ img ]


Top
Profile Quote
starcd53
Post subject: Re: error 52
Posted: Sun Oct 27, 2013 9:08 am
Offline
 
Posts: 8
Joined: Thu Oct 24, 2013 11:07 pm
 
First of all practically no one is running Vista anymore. I am running Windows 7 Ultimate 64 bit. My C: Drive is a Samsung 512 SSD Drive. My computer is an Very Ultra High End System. Where is FDC supposed to be installed? It sounds like you are an expert, but you certainly don't like to tell anyone where is the best place to install it, just where NOT to install it. A little help is certainly appreciated please, without having to drag it out of you.

P.S. Please explain error 52? What exactly does it entail besides ( Bad file name or number in 'updateBlackbox' routine 0, or is that beyond you, as it is certainly beyond me, because I definitely don't understand it.

Does it mean 'out of available memory'? Is that why FSX freezes and breaks off from FDC and then reboots FSX, but doesn't reboot successfully, because FSX has to be shut down again and FSX has to be restarted from scratch.
I will try it your way and see if I have any luck with hopefully better results. Right now I have FDC and Version 3.79. I will try fdc accum314 and let you know my results in a few days. Thank You.


Top
Profile Quote
pasterke
Post subject: Re: error 52
Posted: Sun Oct 27, 2013 9:32 am
Offline
 
Posts: 232
Joined: Wed May 20, 2009 6:11 am
 
Quote:
First of all practically no one is running Vista anymore. I am running Windows 7 Ultimate 64 bit. My C: Drive is a Samsung 512 SSD Drive. My computer is an Very Ultra High End System. Where is FDC supposed to be installed? It sounds like you are an expert, but you certainly don't like to tell anyone where is the best place to install it, just where NOT to install it. A little help is certainly appreciated please, without having to drag it out of you.
- Vista or LATER ... so the same applies for Windows7/8...
Quote:
do NOT instal into the default "c:/program files" folder
- does not matter as long as it is not the program folder(x86) : so install it in C:\FDC - D:\FDC ...

_________________

Regards,

patrick

[ img ]
[ img ][ img ]


Top
Profile Quote
Dave Leesley
Post subject: Re: error 52
Posted: Sun Oct 27, 2013 12:49 pm
Offline
 
Posts: 1329
Joined: Fri May 22, 2009 8:27 pm
Location: Yorkshire
 
So Starcd53 this is what you need to do.

Uninstall FDC,delete all files and folders that are left behind,restart your system and then re-install into any drive as described by Patrick,(everbody has different setups that's why it's easier to say NOT to install into Program Files.)

Then you will need to update to the latest version using the accumulative updater again as Patrick explained to you.

Hopefully this will conclude this matter.

_________________

Regards Dave
Forum Moderator

[ img ]
[ img ]


Top
Profile Quote
starcd53
Post subject: Re: error 52
Posted: Mon Oct 28, 2013 10:37 pm
Offline
 
Posts: 8
Joined: Thu Oct 24, 2013 11:07 pm
 
I have downloaded the latest cumulative update 3.14, from the support forum. The update corrected the error 52 message and eliminated the freeze I was reporting. Thank you.

I have also re-installed FDC on Drive C:, by itself, under NO-Program Files.

Thanks again for your Specific Help.

Matter Concluded.


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 1 of 1  [ 10 posts ]
Return to “FDC Support”
Jump to: