OnCourse Software
https://www.ocs-support.co.uk/forums/

Several Issues first flight with latest beta
https://www.ocs-support.co.uk/forums/viewtopic.php?t=4372		 Page 1 of 1
Author:  cubsatl69 [ Sat Nov 25, 2023 9:34 pm ]
Post subject:  Several Issues first flight with latest beta
I experienced several issues with the latest beta.

1) Transponder code was not auto set.
2) Frequencies were not auto tuned
3) tgs.exe gave a microsoft windows warning when loading, minimized FSX and went out to warning message
4) Never received takeoff clearnce, tuned manually to tower and than responded to ground and asked for taxi

Reporting for your testing purposes, as I understand this is a beta, but I have never had these issues before.

Paul
Author:  SkyCamel [ Sun Nov 26, 2023 7:21 am ]
Post subject:  Re: Several Issues first flight with latest beta
Yes I forgot, the Transponder code not set also in my flight.
Author:  Dave March [ Sun Nov 26, 2023 12:05 pm ]
Post subject:  Re: Several Issues first flight with latest beta
Well I can't recreate this problem unfortunately. Would you mind running with the attached debug version... I don't need a complete flight, just go through clearance to the point where ATC tell you to contact ground on xyz, then disconnect PF3 and exit. Then attach the log for me please.
Author:  SkyCamel [ Sun Nov 26, 2023 2:51 pm ]
Post subject:  Re: Several Issues first flight with latest beta
attached the log as requested, squawk code not set
Author:  Dave March [ Sun Nov 26, 2023 3:57 pm ]
Post subject:  Re: Several Issues first flight with latest beta
Mmmmh, well according to the log there's absolutely nothing wrong and the transponder was set. So, if you're not seeing it being set then it must be the aircraft, although PF3 can actually read it too because it frequently checks to ensure the transponder is set correctly throughout your flight.
Quote:
11/26/2023 2:21:01 PM: 480 - Transcript: 'Roger QNH 1014 Ground on 118.5 Condor 8632 '
11/26/2023 2:21:01 PM: 480 - FS Screen : Roger QNH 1014 Ground on 118.5 Condor 8632
11/26/2023 2:21:08 PM: 570 - COM Freq changed to: 118.5 IPC Set: 6224
11/26/2023 2:21:08 PM: 570 - COM Changes at #2
11/26/2023 2:21:09 PM: 570 - Send to PF3 Display - 1:2:118.5:0:0:0:0:
11/26/2023 2:21:10 PM: 590 - Calling Trans_Freq...
11/26/2023 2:21:10 PM: 590 - Write to FSUIPC 26471
11/26/2023 2:21:10 PM: 590 - FSUIPC RetCode: 0
11/26/2023 2:21:10 PM: 590 - Trans_Freq Returned...
11/26/2023 2:21:10 PM: 590 - Transponder changed to 6767 at #1
11/26/2023 2:21:10 PM: 590 - LX:7000, CX:6767, XSet:1, iX:6767
11/26/2023 2:21:10 PM: 590 - TRANSPONDER Correct!
Author:  cubsatl69 [ Sun Nov 26, 2023 4:54 pm ]
Post subject:  Re: Several Issues first flight with latest beta
Dave,

I am attaching my log just for reference. Everything appears to have worked correctly on my end this time. Transponder was set and frequencies changed from clearance to ground automatically.

Is it ok to keep using the version you sent, or will that cause issues.

Thanks for your support.

Paul
Author:  Dave March [ Sun Nov 26, 2023 5:42 pm ]
Post subject:  Re: Several Issues first flight with latest beta
Thanks Paul, you can use the latest beta I sent you.
Author:  Dave Leesley [ Mon Nov 27, 2023 2:53 pm ]
Post subject:  Re: Several Issues first flight with latest beta
dmarch wrote: *  Sun Nov 26, 2023 3:57 pm
Mmmmh, well according to the log there's absolutely nothing wrong and the transponder was set. So, if you're not seeing it being set then it must be the aircraft, although PF3 can actually read it too because it frequently checks to ensure the transponder is set correctly throughout your flight.
Quote:
11/26/2023 2:21:01 PM: 480 - Transcript: 'Roger QNH 1014 Ground on 118.5 Condor 8632 '
11/26/2023 2:21:01 PM: 480 - FS Screen : Roger QNH 1014 Ground on 118.5 Condor 8632
11/26/2023 2:21:08 PM: 570 - COM Freq changed to: 118.5 IPC Set: 6224
11/26/2023 2:21:08 PM: 570 - COM Changes at #2
11/26/2023 2:21:09 PM: 570 - Send to PF3 Display - 1:2:118.5:0:0:0:0:
11/26/2023 2:21:10 PM: 590 - Calling Trans_Freq...
11/26/2023 2:21:10 PM: 590 - Write to FSUIPC 26471
11/26/2023 2:21:10 PM: 590 - FSUIPC RetCode: 0
11/26/2023 2:21:10 PM: 590 - Trans_Freq Returned...
11/26/2023 2:21:10 PM: 590 - Transponder changed to 6767 at #1
11/26/2023 2:21:10 PM: 590 - LX:7000, CX:6767, XSet:1, iX:6767
11/26/2023 2:21:10 PM: 590 - TRANSPONDER Correct!
Some high end aircraft like PMDG,Fenix etc do not set the transponder,it will be set by PF3 but does not automatically set in cockpit,so therefore manual intervention is required.
Author:  SkyCamel [ Mon Nov 27, 2023 4:01 pm ]
Post subject:  Re: Several Issues first flight with latest beta
Dave Leesley wrote: *  Mon Nov 27, 2023 2:53 pm

Some high end aircraft like PMDG,Fenix etc do not set the transponder,it will be set by PF3 but does not automatically set in cockpit,so therefore manual intervention is required.
Well before it was always set by PF3 in the FBW a32nx, this time it stayed on 7000.
But I'm on the Development version of a32nx with regular updates (sometimes daily) so it might well be that something changed in the a32nx soft.
Cheers,
Luc
Author:  Dave Leesley [ Thu Nov 30, 2023 4:43 pm ]
Post subject:  Re: Several Issues first flight with latest beta
Hi Luc,
I'm guessing it's down to the coding,FBW and Headwinds should do it,such as Fenix or PMDG that seem to be really high end won't,
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited