OnCourse Software
https://www.ocs-support.co.uk/forums/

Radios
https://www.ocs-support.co.uk/forums/viewtopic.php?t=3627
Page 1 of 2
Author:  mhazy [ Thu Jul 15, 2021 12:12 am ]
Post subject:  Radios

hi
jusst been flying caranado pa44 from start up to taxi to line up and take off
radios work fine and frequency changes automaticly using cp mode 2 but !!

as soon as i take off the vcp does not appear to change frequency, and every time i reset to correct frequency the radio goes back automatically to the original frequency that was on the radio
any ideas anyone?

Author:  mhazy [ Thu Jul 15, 2021 12:54 am ]
Post subject:  Re: Radios

hi
same problem on pmdg dc6 radios just change back to previous freuency on there own so im never on the correct frequency

using msfs
Mike
ps trying cessna 172 stock

Author:  mhazy [ Thu Jul 15, 2021 2:04 am ]
Post subject:  Re: Radios

hi

ok works perfect with stock 172
any ideas about the payware above?

Mike

Author:  Dave March [ Thu Jul 15, 2021 5:42 am ]
Post subject:  Re: Radios

Sorry, can't help without the log file. Please see very large message at the top of forum.

Author:  mhazy [ Fri Jul 16, 2021 12:47 am ]
Post subject:  Re: Radios

Hi
think problem has something to do with virtyal reality as only occurs when i put this on
otherwise all aircraft and atc perform fine
log attached
mike

Author:  pilotguy27 [ Fri Jul 16, 2021 12:06 pm ]
Post subject:  Re: Radios

I have no issues with the radios and VCP in any of my aircraft, payware or otherwise. I only fly in VR...

Author:  Dave March [ Fri Jul 16, 2021 2:39 pm ]
Post subject:  Re: Radios

Sorry but I can't find anything wrong with the log you provided at all. Each time ATC gave you a frequency to change to the VCP changed it correctly and the COM radio stayed on that frequency until you were instructed to contact the nect facility. I didn't even notice you changing the COM frequency manually. Perhaps you attached the wrong log?

If you can recreate the issue and be more specific in which frequency the VCP failed to change, etc.

Author:  mhazy [ Fri Jul 16, 2021 4:07 pm ]
Post subject:  Re: Radios

Hi
Dave,
So if I select vcp2 option I still need to retune radios?
I find that even when I do this the radio frequency goes back to something else
Also the transponder number changes
Works perfect out of virtual reality, suppose another one of those weird things
Will play around and get back if I find anything
Any suggestion on where to look from yourself or anyone much appreciated
Mike

Author:  Dan77 [ Fri Jul 16, 2021 5:07 pm ]
Post subject:  Re: Radios

If you are using CP Mode 2 you do NOT need to tune the radios manually. Some users have reported similar problems due to hotkey conflicts or MSFS Assist; see if the following thread is of any help:

viewtopic.php?f=8&t=3479

The debug_monitor.log file is from your most recent connection of PF3 to the simulator, so if you are submitting a log file it should if possible be immediately after a flight where you have experienced the problem.

Author:  mhazy [ Fri Jul 16, 2021 9:33 pm ]
Post subject:  Re: Radios

hi
my problem is that after take off when i am to be handed to radar contact, the frequency does not change even in cp2 or even if i enter manually.

if i enter 122.2 then it simply changes back to another frequency it will not stay on the frequency i put in or that cp2 puts in hope this is clearer

this is on the two aircraft above

ive now spent many hours trying everything i can and have now finally given up.
looks like ill have to go back to asobo atc as this works perfect with all my aircraft, and maybe look again sometime in the future.
such a shame as apart from costing me money i feel ive wasted a lot of flying time, the software is quite good, and I have used this for nearly 9 years, so i do have a pretty good idea of how it works.
thanks
Mike

back to flying

mike

Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited