Hello,
I flew from EGCC to EKCH several times. On each flight, PF3 vectored me from the last waypoint of the flight plan to runway 22L, the only runway I had set up in the SID/STAR page for landing. But the vectors I got didn't work to intercept the localizer. I don't remember the headings I got, but from the last waypoint the vectors took me close to the localizer track, but in the opposite direction. Then a right turn very late and very far away from the threshold (about 20NM or more), which caused me to overshoot the localizer. Finally, a right turn onto a heading parallel to the localizer with an offset to the left of the localizer. At the end I had to correct my course to the right to intercept the ILS.
Also the final altitude was much too high (4000ft). I set the minimum FAF altitude to 2500ft and a distance of 10NM.
For other flights to other airports I got much better vectors. So I assme there is somthing wrong with the flightplan.
Any advices are welcome.
Cheers
Jens