OnCourse Software
http://www.ocs-support.co.uk/forums/

virtual copilot
http://www.ocs-support.co.uk/forums/viewtopic.php?t=835		 Page 1 of 2
Author:  memphis297 [ Fri Oct 14, 2011 4:13 pm ]
Post subject:  virtual copilot
i think i have tried everything but how do i get the virtual copilot to actually do turns in a route i have noticed if i let it go it will just keep going straight if using heading. and if on navagation when given a heading it won't switch to heading. is there something i am missing alot of my routes have turns and it wud be nice if it will do most of my flight when i can't.


thanks in advance,

kevin
Author:  Dave Leesley [ Fri Oct 14, 2011 9:10 pm ]
Post subject:  Re: virtual copilot
Use Heading or LNAV mode on your aircraft(depending which aircraft you are using)

Use CP3 in Virtual Co-Pilot mode on options 1 page..

See my tutorials for detailed explanation
Author:  memphis297 [ Fri Oct 14, 2011 11:32 pm ]
Post subject:  Re: virtual copilot
Where do i find the detailed explanation at tutorial
Author:  memphis297 [ Sat Oct 15, 2011 7:42 am ]
Post subject:  Re: virtual copilot
I think I have found what you were talking about. But u have done it with the altitude hold on for all of them. I have tried using the heading and navagation button on the autopilot andnoth of them on either GPS node or navigation mode. I will try both again in the morning and see if i missed something. If you have any ideas what I could be doing wrong let me know.


Kevin
Author:  memphis297 [ Sat Oct 15, 2011 4:55 pm ]
Post subject:  Re: virtual copilot
I have tried it again and same as always it will not follow the line line had multiple turns and it kept goin straight. I must be doing something wrong


Kevin
Author:  Dave Leesley [ Sat Oct 15, 2011 9:51 pm ]
Post subject:  Re: virtual copilot
Please post your PFE.cfg file from your main PFE folder so we can take alook at it..
Author:  memphis297 [ Sun Oct 16, 2011 12:37 pm ]
Post subject:  Re: virtual copilot
[Config]
debugmode=5
CopMode=3
EasyATC=0
Vol=0
ADVPath=C:\New folder\PFE\FS2000\ADV\
AutoUpdates=1
AirwayDeviation=1
FSTimeout=60
Default_Accent=22
Default_Voice=7
PVList=40
Default_Airline=85
DAList=27
Default_Callsign=297
JetDistance=6
PropDistance=3
PauseDistance=30
FAFPause=0
HoldPercent=0
SID=0
SIDCalls=0
FSData=7
CallMillibars=0
UseTA4VFR=1
STAR=0
STARCalls=0
VoiceXMsg=0
VoiceXMsg2=0
VoiceXMsg3=0
ChatterPercent=100
SlowATIS=0
AtisVol=0
UsePFEAtis=1
UseRealChatter=1
MaxAtisLoops=2
PushStart=1
MustTune2ATIS=1
VoiceSets=0
BackVol=-1500
TGS_Default_Accent=22
TGS_Default_Voice=0
TGSvs=33
BackgroundNoiseVariation=1
HeavyCallsign=0
RestartSave=1
RestartInterval=1
VCPVol=0
XPack2=0
NoSpeedRestrictionCallsAllowed=0
GCTimeout=0
DisplayVoiceSetID=1
ManualAltAdj=0
UseQNH=1
PMAP=0
AcarsX=0
AcarsDelay=30
AcarsLeft=0
AcarsTop=0
SayAgainOp=0
LastAutoCheck=20111015
Ver=2.14.0
LastADV=C:\New folder\PFE\FS2000\ADV\pf2000 - s24 to ktol.adv
LeftPos=8655
TopPos=2715

[Hotkeys]
Hotkey1=0048
Hotkey2=0049
Hotkey3=0050
Hotkey4=0051
Hotkey5=0052
Hotkey6=0053
Hotkey7=0054
Hotkey8=0055
Hotkey9=0056
Hotkey10=0057
Hotkey11=0191
Hotkey12=3069
Hotkey13=3187
Hotkey14=3087
Hotkey15=3086
Hotkey16=3067
Hotkey17=3089
Hotkey18=3078
HotKey19=3068
HotKey20=0072
HotKey21=0076
HotKey22=0027

[HotkeysActive]
Hotkey1=1
Hotkey2=1
Hotkey3=1
Hotkey4=1
Hotkey5=1
Hotkey6=1
Hotkey7=1
Hotkey8=1
Hotkey9=1
Hotkey10=1
Hotkey11=1
Hotkey12=1
Hotkey13=1
Hotkey14=1
Hotkey15=1
Hotkey16=1
Hotkey17=1
Hotkey18=1

HotKey19=1
HotKey20=1
HotKey21=1
HotKey22=0
[TA]
TA00=7000
TA01=13000
TA02=11000
TA03=10000
TA04=6000
TA05=18000
TA06=18000
TA07=3000
TA08=4000
TA09=18000
TA10=5000
TA11=8000
TA12=11000
TA13=7000
TA14=6000
TA15=5000
TA16=6000
TA17=18000
TA18=4000
TA19=4000
TA20=18000
TA21=6000
TA22=18000
TA23=18000
TA24=18000
TA25=18000
[Traffic]
Range=10
Altitude=2000
[ClosedCaption]
Captions=1
DisplaySeconds=10
[TGS]
TGSOn=0
Visual=0
Audio=1
HdgBug=1
ReduceVol=25
PromptAt=7
GateType=9
ATCTaxiSpd=0
ReadbackTaxiSpd=1
FinalPromptAt=50
[CallMillibars]
CallMillibars0=0
CallMillibars1=0
CallMillibars2=0
CallMillibars3=0
CallMillibars4=0
CallMillibars5=0
CallMillibars6=0
CallMillibars7=0
CallMillibars8=0
CallMillibars9=0
CallMillibars10=0
CallMillibars11=0
CallMillibars12=0
CallMillibars13=0
CallMillibars14=0
CallMillibars15=0
CallMillibars16=0
CallMillibars17=0
CallMillibars18=0
CallMillibars19=0
CallMillibars20=0
CallMillibars21=0
CallMillibars22=0
CallMillibars23=0
CallMillibars24=0
CallMillibars25=0
[RemoteText]
RTActive=0
SocketPort=1008
[Tweaks]
TruncateChatterCallsigns=0
ClrError=3
AltTimer=120
HdgTimer=60
BadReception=25
FinalApproachSpeed=0
[Convert]
SourceP=C:\Users\kevin\Documents\Flight Simulator X Files\
TargetP=C:\New folder\PFE\FS2000\Pilots\
[Rebuild]
FSXPath=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\
LastRebuild=10/13/2011 9:43:25 AM
LastFS=8
MakeRwys_Version=Make Runways File: Version 4.41, by Pete Dowson





here ya go also i have noticed when trying to open the pfe display it is not in the folder just the .dat
could it possibly be i have a bad install.

thanks kevin
Author:  Dave March [ Sun Oct 16, 2011 3:34 pm ]
Post subject:  Re: virtual copilot
What aircraft are you using?

Sent from my Samsung Galaxy S
Author:  memphis297 [ Mon Oct 17, 2011 12:34 am ]
Post subject:  Re: virtual copilot
I have tried with he realairsimulations Duke turbine the carenado c185 skywagon tundra and the default beech baron
Author:  memphis297 [ Mon Oct 17, 2011 12:36 am ]
Post subject:  Re: virtual copilot
I have tried with he realairsimulations Duke turbine the carenado c185 skywagon tundra and the default beech baron
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited