OnCourse Software

Welcome to our Product Support Forums

KFAT will not compile as origin airport?

Post Reply   Page 1 of 1  [ 4 posts ]
Author Message
rhodges
Post subject: KFAT will not compile as origin airport?
Posted: Tue Aug 02, 2011 1:33 pm
Offline
 
Posts: 71
Joined: Fri Aug 28, 2009 10:26 pm
 
Good morning Dave, or whatever time it may be in your part of the world.

You may want to reference a previous thread we discussed: "EHAM will not compile (FSC originated)" by "rhodges" dated "Wed. Apr. 07, 2010 5:17PM".

In similar fashion, I cannot get KFAT to compile as my origin airport. I have tried several destinations including only useing it as the origin, and the destination (no immediate waypoints).

In the referenced "EHAM" thread mentioned above, the problem was that EHAM was below sea level. However, in this case, both the origin and destination are well above sea level, so I am a bit puzzled.

My original flight plans in FSC was as follows:

"[Flightplan]
AppVersion=9.1.40901
title=KFAT to KSLC
description=KFAT, KSLC
type=IFR
routetype=1
cruising_altitude=25000
departure_id=KFAT, N36* 46.57', W119* 42.98', -000335.00
departure_position=11L
destination_id=KSLC, N40* 47.30', W111* 58.67', -004226.00
departure_name=Fresno Yosemite Intl
destination_name=Salt Lake City Intl
alternate_name=
waypoint.0=, KFAT, , KFAT, A, N36* 46.57', W119* 42.98', +000335.00,
waypoint.1=KK, FRA, , FRA 115.60, V, N37* 06.25', W119* 35.72', +000000.00,
waypoint.2=KK, FMG, , FMG 117.90, V, N39* 31.87', W119* 39.35', +000000.00,
waypoint.3=KK, LLC, , LLC 116.50, V, N40* 07.48', W118* 34.65', +000000.00,
waypoint.4=KK, BAM, , BAM 112.20, V, N40* 34.13', W116* 55.33', +000000.00,
waypoint.5=KK, BVL, , BVL 112.30, V, N40* 43.55', W113* 45.43', +000000.00,
waypoint.6=KK, TIMPI, , TIMPI, I, N40* 48.42', W112* 38.72', +000000.00,
waypoint.7=, KSLC, , KSLC, A, N40* 47.30', W111* 58.67', +004226.00,

[FSC]
DepartAPCode=KFAT
DepartNum=0
DepartID=11L
DepartType=Rwy
DestAPCode=KSLC
RouteType=1
SID=
STAR=
WP=1,VOR,FRA,FRIANT,37.1042,-119.5953,115.60,16.6313,15.299,1,2885
WP=2,VOR,FMG,MUSTANG,39.5311,-119.6558,117.90,358.8971,16.002,1,2887
WP=3,VOR,LLC,LOVELOCK,40.1247,-118.5775,116.50,54.0225,16.101,1,2661
WP=4,VOR,BAM,BATTLE MOUNTAIN,40.5689,-116.9222,112.20,70.0692,15.700,1,2667
WP=5,VOR,BVL,BONNEVILLE,40.7258,-113.7572,112.30,85.2307,14.898,1,2666
WP=6,Int,TIMPI,TIMPI,40.8070,-112.6453,0.00,84.1357,14.601,1,26404"

Any ideas?

Thanks:
RTH

Edit: KFAT compiles just fine as the destination airport from other origins.


Top
Profile Quote
rhodges
Post subject: Re: KFAT will not compile as origin airport?
Posted: Tue Aug 02, 2011 10:44 pm
Offline
 
Posts: 71
Joined: Fri Aug 28, 2009 10:26 pm
 
Dave:

"-000335.00" in the departure, and "-004226.00" in the destination line items were originally "+00035.00" and "+004226.00".

I am just now realizing that the copy of the FSC flightplan I attached was one that I had edited as follows just to see what would happen. As expected, that was not the problem and solved nothing. All entries were originaly positive.

"departure_id=KFAT, N36* 46.57', W119* 42.98', -000335.00
destination_id=KSLC, N40* 47.30', W111* 58.67', -004226.00"

The complete and proper flightplan originated in FSC was as follows:

"[Flightplan]
AppVersion=9.1.40901
title=KFAT to KSLC
description=KFAT, KSLC
type=IFR
routetype=1
cruising_altitude=25000
departure_id=KFAT, N36* 46.57', W119* 42.98', +000335.00
departure_position=11L
destination_id=KSLC, N40* 47.30', W111* 58.67', +004226.00
departure_name=Fresno Yosemite Intl
destination_name=Salt Lake City Intl
alternate_name=
waypoint.0=, KFAT, , KFAT, A, N36* 46.57', W119* 42.98', +000335.00,
waypoint.1=KK, FRA, , FRA 115.60, V, N37* 06.25', W119* 35.72', +000000.00,
waypoint.2=KK, FMG, , FMG 117.90, V, N39* 31.87', W119* 39.35', +000000.00,
waypoint.3=KK, LLC, , LLC 116.50, V, N40* 07.48', W118* 34.65', +000000.00,
waypoint.4=KK, BAM, , BAM 112.20, V, N40* 34.13', W116* 55.33', +000000.00,
waypoint.5=KK, BVL, , BVL 112.30, V, N40* 43.55', W113* 45.43', +000000.00,
waypoint.6=KK, TIMPI, , TIMPI, I, N40* 48.42', W112* 38.72', +000000.00,
waypoint.7=, KSLC, , KSLC, A, N40* 47.30', W111* 58.67', +004226.00,

[FSC]
DepartAPCode=KFAT
DepartNum=0
DepartID=11L
DepartType=Rwy
DestAPCode=KSLC
RouteType=1
SID=
STAR=
WP=1,VOR,FRA,FRIANT,37.1042,-119.5953,115.60,16.6313,15.299,1,2885
WP=2,VOR,FMG,MUSTANG,39.5311,-119.6558,117.90,358.8971,16.002,1,2887
WP=3,VOR,LLC,LOVELOCK,40.1247,-118.5775,116.50,54.0225,16.101,1,2661
WP=4,VOR,BAM,BATTLE MOUNTAIN,40.5689,-116.9222,112.20,70.0692,15.700,1,2667
WP=5,VOR,BVL,BONNEVILLE,40.7258,-113.7572,112.30,85.2307,14.898,1,2666
WP=6,Int,TIMPI,TIMPI,40.8070,-112.6453,0.00,84.1357,14.601,1,26404"

I apologize for leading you down the wrong path.

Thanks:
RTH


Top
Profile Quote
rhodges
Post subject: Re: KFAT will not compile as origin airport?
Posted: Wed Aug 03, 2011 9:11 am
Offline
 
Posts: 71
Joined: Fri Aug 28, 2009 10:26 pm
 
I finally realized my mistake.

My Center altitude was below that of the 4,426 MSL of KSLC.

Sorry for the false alarm.
RTH


Top
Profile Quote
Dave March
Post subject: Re: KFAT will not compile as origin airport?
Posted: Thu Aug 04, 2011 6:26 am
Site Admin
Offline
 
Posts: 6197
Joined: Mon May 18, 2009 6:22 pm
Location: Sawtry, Cambridgeshire. UK
Contact: Website
 
Ah ha!

Well done.

Sent from my Samsung Galaxy S

_________________

Cheers

Dave March

Email: dmarch@oncourse-software.co.uk

I don't know if my memory is getting worse as I get older...
...I just can't remember how it used to be!

[ img ]


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 1 of 1  [ 4 posts ]
Return to “PFE Support”
Jump to: