| OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
| FDC SYNC http://www.ocs-support.co.uk/forums/viewtopic.php?t=673 |
Page 1 of 1 |
| Author: | tunellbana [ Fri Feb 11, 2011 9:26 pm ] |
| Post subject: | FDC SYNC |
| I would need some help with setting up the FDC properly, the call out speeds do not match especially in missions. In missions you already have a copilot that is only calling out the speed and help you remember things “did you catch that captain?” So I taxi everything is fine FDC extends flaps for takeoff, go through all start procedures, when it’s time to takeoff it will call airspeed active, but then its calling V1, Rotate and V2 about 2-3 sec before the “Main Copilot for the mission”. This also happens during Free Flight with flight planner, since I know my speeds for that aircraft and it tells me to rotate about 20knots before takeoff speed for the 737-800. Also during landings sometimes FDC will give me wrong flaps settings, and after landing it will also behave funny sometime, like retracting flaps while still on active etc. Sometimes during landings is not aplying corecct flaps setting or it will override my setting. Is there any help for how to match FDC with FSX so it gives me the correct readings and settings? TY MB |
| Author: | tunellbana [ Fri Feb 11, 2011 9:36 pm ] |
| Post subject: | Re: FDC SYNC |
| So if i fly a mission with will be something like this: FDC =V1, FDC= Rotate, "Main mission copilot" = V1, FDC = V2, Main cop = Rotate, Main cop = V2, the same in landings in mission the Mission cop tells you to set flaps 10 for ex, fdc confirms, flaps 10 but then it may retract my flaps back up. In free flight it will call out speeds aprox 20knots before actual speed. Also in 747-400 when it calls out descending altitude for landing it goes: 1000 - 500 approaching minimums, then 400, 300, 200, 100, 50 ,40 and nothing, while on all other aircrafts it goes all the way down to 10 and the second after I make touchdown. TY MB |
| Author: | Dave March [ Fri Feb 11, 2011 10:03 pm ] |
| Post subject: | Re: FDC SYNC |
| No you can't sync fdv with fsx missions. As for the timing issues with callouts there are plenty of options available within fdc to fine tune such things Sent from my Samsung Galaxy S |
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited | |