| OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
| Small problem contacting ground on arrival http://www.ocs-support.co.uk/forums/viewtopic.php?t=4499 |
Page 1 of 2 |
| Author: | bobsk8 [ Sun Mar 10, 2024 3:06 pm ] |
| Post subject: | Small problem contacting ground on arrival |
| I have had the same thing happen twice with latest version of PF3. After taxiing off the runway, I press the 5 key, and rather than getting ground control, I am switched to ATIS frequency and Atis starts playing. If I manually change freq to ground, and hit the 5 key again, the same thing happens, it switches to ATIS. This happened the last two flights at KLAS and KPHL. |
| Author: | Dave March [ Sun Mar 10, 2024 3:33 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
| Probably the old duplicate frequency issue that rears its ugly head every do often |
| Author: | bobsk8 [ Sun Mar 10, 2024 3:45 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
I am running make runways again, I discovered I had an older version. Will report back. |
| Author: | bobsk8 [ Sun Mar 10, 2024 5:26 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
| Ran Make Rwys, tried another flight and contacted ground no problem. |
| Author: | bobsk8 [ Sun Mar 10, 2024 7:41 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
| Same thing happened again at KEWR. The radio switches to 121.72, and nothing happens. That was the same frequency at KLAS and KPHL.. This time when I hit 5, it didn't switch to Atis, it just didn't respond. |
| Author: | bobsk8 [ Sun Mar 10, 2024 8:44 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
| Just flying another approach to KDCA, and PF3 display is saying that the ground frequency there is 121.72. Will see if it works this time. I just landed and was able to contact ground, but the freq on the radio was 121.70, not 121.72...... Will have to experiment with this some more, tomorrow,. |
| Author: | bobsk8 [ Mon Mar 11, 2024 1:07 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
| I see what part of my problem is, why don't the proper frequencies show up in the PF3 Displayer.? Tower at CYYZ is 118.350 and displayed shows y t tower as 123.800, and always shows ground as 121.72/ Just landed at CYYZ, contacted ground at 119.100 PF3 Display still shows 121.72 for ground. |
| Author: | Dave March [ Mon Mar 11, 2024 2:24 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
| Let me see the log please |
| Author: | bobsk8 [ Mon Mar 11, 2024 2:29 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
I found the problem. I looked at the PF3 Display INI file and it was pointed to "Daves Desktop PC" instead of my PC. I just fixed. Will let you know. |
| Author: | bobsk8 [ Mon Mar 11, 2024 2:40 pm ] |
| Post subject: | Re: Small problem contacting ground on arrival |
This is the last flight before I changed the PF3 displayer INI |
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited | |