| OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
| No ATC comunications http://www.ocs-support.co.uk/forums/viewtopic.php?t=446 |
Page 1 of 1 |
| Author: | dcamp [ Mon May 03, 2010 1:35 pm ] |
| Post subject: | No ATC comunications |
| I have a problem with PFE. When the aircraft is on ground all work fine, but when airborne, after the ATC comunication "Resume own navigation" I don't receive any other comunication except te traffic advisories. For exemple I don't receive comunication about the flight level or if I flight in a different course regard the flight plane I don't receive any comunication. In PFE Display the voice next wp don't change and alwais show the first waypoint. Can you help me? Sorry for my english. Diego Italy |
| Author: | Phantom1980 [ Mon May 03, 2010 9:50 pm ] |
| Post subject: | Re: No ATC comunications |
| Try to change windows regional settings to US or UK. Worked for me |
| Author: | Dave March [ Mon May 03, 2010 10:34 pm ] |
| Post subject: | Re: No ATC comunications |
| Diego, it sounds to me as if you're not reaching your first waypoint or assigned altitude |
| Author: | dcamp [ Tue May 04, 2010 1:03 pm ] |
| Post subject: | Re: No ATC comunications |
| Thank for your reply. PFE don't sound also after I reach the first waypoint or after I reach the initial altitude. PFE displayer show always the first waipont also when I reach the successives waypoints. |
| Author: | Dave March [ Tue May 04, 2010 5:06 pm ] |
| Post subject: | Re: No ATC comunications |
| Have you tried changing your regional settings? |
| Author: | dcamp [ Tue May 04, 2010 9:14 pm ] |
| Post subject: | Re: No ATC comunications |
| I have changed the regional setting but I have the same problem. When I reached the cruise altitude as flight plan atc don't speak and, for exemple, the command for higher or lower altitude don't work. PFE display still show only the first waypoint. |
| Author: | Dave March [ Tue May 04, 2010 9:59 pm ] |
| Post subject: | Re: No ATC comunications |
| Please send me the debug_monitor.log file from the PFE\Logs folder |
| Author: | Dave March [ Thu May 06, 2010 11:21 am ] |
| Post subject: | Re: No ATC comunications |
| Hi, Just taken a look at your log and the reason you are not receiving any communication from ATC is because you have not tuned to any facility. In the log you sent there is no Clearance or Ground control and Tower frequency is 118.90 but you were tuned to 122.95. The message on the screen would have said ComFreq: 122.95 <> TowerFreq: 118.9 |
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited | |