OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
PF3 Display frequencies get stuck http://www.ocs-support.co.uk/forums/viewtopic.php?t=3809 |
Page 1 of 2 |
Author: | cteixeira [ Sun Jan 16, 2022 2:39 am ] |
Post subject: | PF3 Display frequencies get stuck |
Hello After leaving LPEV, heading to LPCS, I contacted departure frequency on 119.52, and on my pf3 display (product version 4.01) was still connected on unicon 122.7. Switched to another frequency and still had unicon frequency stuck on pf3 display. Near the STAR, contacted again departure, and then ATC told me to contact approach, and the correct frequencies appeared on pf3 display. I’m using pf3 display utility on a networked pc. Thanks, Carlos |
Author: | Dave March [ Sun Jan 16, 2022 11:37 am ] |
Post subject: | Re: PF3 Display frequencies get stuck |
Bit of a tricky one to track down actually... I can see the correct data was sent to PF3 Display but I have no specific logging from it unfortunately. The latest version number is 4.1.1 or probably displayed as 4.1.0.1 if you use right-click/properties |
Author: | cteixeira [ Sun Jan 16, 2022 2:05 pm ] |
Post subject: | Re: PF3 Display frequencies get stuck |
I made a test, same flight plan, using pf3 display on main computer, and results are the same. Will try later with a different flight plan. |
Author: | cteixeira [ Sun Jan 16, 2022 3:46 pm ] |
Post subject: | Re: PF3 Display frequencies get stuck |
My PF3 version is 3.13 |
Author: | Dave March [ Sun Jan 16, 2022 5:28 pm ] |
Post subject: | Re: PF3 Display frequencies get stuck |
Please try the attached |
Author: | cteixeira [ Sun Jan 16, 2022 6:05 pm ] |
Post subject: | Re: PF3 Display frequencies get stuck |
It's working correctly, thank you so much for your support |
Author: | cteixeira [ Mon Jan 17, 2022 11:20 pm ] |
Post subject: | Re: PF3 Display frequencies get stuck |
Hello again Just one thing. When I try to obtain ATIS for destination, acars atis transmission window do not popup. Thanks, Carlos |
Author: | Dave March [ Tue Jan 18, 2022 10:01 am ] |
Post subject: | Re: PF3 Display frequencies get stuck |
Log? |
Author: | cteixeira [ Tue Jan 18, 2022 10:37 pm ] |
Post subject: | Re: PF3 Display frequencies get stuck |
Hello Have to say that on my last flight I tried my old pf3 display to see if the ATIS for destination was working (it was), but then had the same problem and returned to your new pf3 display. Thanks Carlos |
Author: | Dave March [ Wed Jan 19, 2022 11:56 am ] |
Post subject: | Re: PF3 Display frequencies get stuck |
If the same thing happens again please include the WX.Log file from your PF3\Logs folder, along with the debug log. According to the debug log everything is working just fine, but the WX.log will tell me a little more with regard the display window |
Page 1 of 2 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited |