| OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
| PF3 goes silent http://www.ocs-support.co.uk/forums/viewtopic.php?t=3807 |
Page 3 of 3 |
| Author: | Dave March [ Mon Jan 17, 2022 6:03 pm ] |
| Post subject: | Re: PF3 goes silent |
| The altitude is set by your VCP in mode 3 on instructions from ATC, not your flight plan. You cannot change altitude according to your flight plan and can only do so when cleared by ATC The LED bars on either side of the gauge give you an indication on how far you are from the next taxi waypoint and possible change of direction |
| Author: | Ramaprabhu [ Wed Jan 19, 2022 3:33 pm ] |
| Post subject: | Re: PF3 goes silent |
| Tody I was landing in EHAM and everything was very fine. As soon as I clear the runaway, usually the ATC will instruct to stop till taxi instructions to the peferred gate is given. I stopped and waited so long. No reply. At this point in time, I wanted to connect with Ground in EHAM after intering the frequency manually and pressing key 5. No response. What would have happened?. How to overide such situvations without starting all over again?. Please issue an update so that all frequencies at the departure or arrival airport must be displayed and they must be clickable by mouse. Cheers |
| Author: | Dave March [ Wed Jan 19, 2022 3:36 pm ] |
| Post subject: | Re: PF3 goes silent |
| I have no idea what happened without seeing the log. Sorry! |
| Author: | Ramaprabhu [ Thu Jan 20, 2022 2:02 pm ] |
| Post subject: | Re: PF3 goes silent |
| Dear Dave, Sorry, I shall include log next time. Please clarify how I call ATC to declare missed approach:. Which key please.?. Should I also indicate missed approach altitude to ATC in PF3 SID/STAR page? Thanks Dave |
| Author: | Dan77 [ Thu Jan 20, 2022 5:05 pm ] |
| Post subject: | Re: PF3 goes silent |
| You declare a missed approach by using Hotkey 9 when tuned to Tower frequency. See pp. 137-140 of the User Guide for a convenient summary of the default hotkey functions. It is not necessary to enter a missed approach altitude on the SID/STAR page. By default PF3 will use an altitude of 3000 ft or so above airport elevation. You can use the MAp Altitude setting if you want to use something other than the default (for example, due to terrain). See p. 47 of the User Guide. |
| Author: | Ramaprabhu [ Fri Jan 21, 2022 3:09 am ] |
| Post subject: | Re: PF3 goes silent |
| Thank You, Dave. |
| Author: | Dave March [ Fri Jan 21, 2022 11:52 am ] |
| Post subject: | Re: PF3 goes silent |
| It was Dan who answered you but I'll pass your thanks onto him |
| Author: | Soufiane [ Sat Jan 22, 2022 11:45 am ] |
| Post subject: | Re: PF3 goes silent |
| Hi, During a flight between CYUL and KDTW I had the same issue at cruising FL : ATC seems to have forgotten me. Any clue with the attached Debug_monitor.log file ? Thanks |
| Author: | Dave March [ Sat Jan 22, 2022 1:02 pm ] |
| Post subject: | Re: PF3 goes silent |
| Please don't tag onto an existing post, it makes it very difficult to keep track of what has and has not been addressed if the issues are not identical. Having said that I'm quite confident this has been addressed in 3.14.0, which I promise to get out before month end |
| Page 3 of 3 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited | |