OnCourse Software
http://www.ocs-support.co.uk/forums/

Pf3 runtime error 9 after updating to 3.10.50
http://www.ocs-support.co.uk/forums/viewtopic.php?t=3573		 Page 1 of 2
Author:  trening [ Wed May 19, 2021 4:39 pm ]
Post subject:  Pf3 runtime error 9 after updating to 3.10.50
Hi and thanks for updating PF3.
Unfortunately, PF3 crash when i try to load a flightplan. I'm getting an error message with problem whilst processing this flightplan, followed by Run Time Error 9 .

Thanks

Thor H
Author:  Dave March [ Wed May 19, 2021 5:14 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Please ZIP and attach all files in your PF3\Flight\FPP folder
Author:  trening [ Wed May 19, 2021 9:47 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Sorry, cannot attach files due to message: not allowed to upload as a possible attack vector...
I`l copy the text :
Process:
No FP corrections required!

FP_Process:
<?xml version="1.0" encoding="utf-8"?>
<SimBase.Document Type="AceXML" version="1,0">
<Descr>AceXML Document</Descr>
<FlightPlan.FlightPlan>
<Title>BIKF To ENAL</Title>
<FPType>IFR</FPType>
<RouteType>HighAlt</RouteType>
<CruisingAlt>35000</CruisingAlt>
<DepartureID>BIKF</DepartureID>
<DepartureLLA>N63° 59' 6.00",W22° 36' 20.00",+000169.00</DepartureLLA>
<DestinationID>ENAL</DestinationID>
<DestinationLLA>N62° 33' 45.00",E06° 07' 11.00",+000070.00</DestinationLLA>
<Descr>BIKF, ENAL</Descr>
<DeparturePosition>0</DeparturePosition>
<DepartureName>KEFLAVIK</DepartureName>
<DestinationName>VIGRA</DestinationName>
<AppVersion>
<AppVersionMajor>10</AppVersionMajor>
<AppVersionMinor>61637</AppVersionMinor>
</AppVersion>
<ATCWaypoint id="BIKF">
<ATCWaypointType>Airport</ATCWaypointType>
<WorldPosition>N63° 59' 6.00",W22° 36' 20.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>BIKF</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="ING">
<ATCWaypointType>VOR</ATCWaypointType>
<WorldPosition>N63° 48' 11.00",W16° 38' 17.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>ING</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="H6310">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N63° 30' 0.00",W10° 00' 0.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>H6310</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="H6305">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N63° 30' 0.00",W05° 00' 0.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>H6305</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="EDAPA">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N62° 55' 13.39",E04° 22' 34.20",+00</WorldPosition>
<ICAO>
<ICAOIdent>EDAPA</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="BVK">
<ATCWaypointType>User</ATCWaypointType>
<WorldPosition>N62° 11' 46.46",E05° 49' 5.53",+00</WorldPosition>
<ICAO>
<ICAOIdent>BVK</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="ENAL">
<ATCWaypointType>Airport</ATCWaypointType>
<WorldPosition>N62° 33' 45.00",E06° 07' 11.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>ENAL</ICAOIdent>
</ICAO>
</ATCWaypoint>
</FlightPlan.FlightPlan>
</SimBase.Document>
----------------------------------------
Selected Flight Plan
----------------------------------------

Adjusted data...

XML Flight Plan successfully adjusted for PF3.


ADJ folder: Only flightplans before updating.

OPR folder: Emty.

R

Thor H
Author:  Dave March [ Thu May 20, 2021 12:22 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Well that flight plan loads okay here so there must be another issue.

Are you saying you've only had this problem since updating to 3.10.50? If so, please download the cumulative updates package from this forum and install it over the top of your existing installation, then try again.

Please let us know how you get on
Author:  trening [ Thu May 20, 2021 4:21 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Thanks.

Yes , the problems started after updating .
I have downloaded the cumulative updates and it seems fine now.
I could not reload an earlier flightplan, but when i made a new one it seems ok.

Haven`t made a flight yet , but will try later this evening.

Best

Thor H
Author:  trening [ Fri May 21, 2021 3:28 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Hi.

Unfortunately i cannot make any new flightplans today. I`l get message of Validate Error whilst processing this flight plan.
Strange enough i can reload my flightplan from yesterday, but not making any new one..

Best
Thor
Author:  Dave March [ Fri May 21, 2021 3:33 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Please ZIP and attach all the files from your PF3\Flight\FPP folder
Author:  trening [ Fri May 21, 2021 6:02 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Process text document:
K7]HV_~<s_D<WASKiP<z\y%T<~*E]UsUz%7?L!&_9ep"

FP_Process:
<?xml version="1.0" encoding="utf-8"?>
<SimBase.Document Type="AceXML" version="1,0">
<Descr>AceXML Document</Descr>
<FlightPlan.FlightPlan>
<Title>ENCN To ENAL</Title>
<FPType>IFR</FPType>
<RouteType>HighAlt</RouteType>
<CruisingAlt>32000</CruisingAlt>
<DepartureID>ENCN</DepartureID>
<DepartureLLA>N58° 12' 14.00",E08° 05' 6.00",+000057.00</DepartureLLA>
<DestinationID>ENAL</DestinationID>
<DestinationLLA>N62° 33' 45.00",E06° 07' 11.00",+000070.00</DestinationLLA>
<Descr>ENCN, ENAL</Descr>
<DeparturePosition>0</DeparturePosition>
<DepartureName>KJEVIK</DepartureName>
<DestinationName>VIGRA</DestinationName>
<AppVersion>
<AppVersionMajor>10</AppVersionMajor>
<AppVersionMinor>61637</AppVersionMinor>
</AppVersion>
<ATCWaypoint id="ENCN">
<ATCWaypointType>Airport</ATCWaypointType>
<WorldPosition>N58° 12' 14.00",E08° 05' 6.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>ENCN</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="DEROB">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N58° 32' 27.85",E07° 37' 26.73",+00</WorldPosition>
<ICAO>
<ICAOIdent>DEROB</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="BEDIK">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N58° 39' 28.60",E07° 15' 11.49",+00</WorldPosition>
<ICAO>
<ICAOIdent>BEDIK</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="BADAB">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N59° 04' 20.30",E06° 01' 21.80",+00</WorldPosition>
<ICAO>
<ICAOIdent>BADAB</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="GEDLU">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N59° 48' 39.14",E05° 35' 31.01",+00</WorldPosition>
<ICAO>
<ICAOIdent>GEDLU</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="INTUM">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N60° 58' 14.80",E05° 50' 57.60",+00</WorldPosition>
<ICAO>
<ICAOIdent>INTUM</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="TUMIM">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N61° 43' 31.50",E05° 55' 32.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>TUMIM</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="LAPEV">
<ATCWaypointType>Intersection</ATCWaypointType>
<WorldPosition>N62° 21' 47.04",E05° 47' 59.69",+00</WorldPosition>
<ICAO>
<ICAOIdent>LAPEV</ICAOIdent>
</ICAO>
</ATCWaypoint>
<ATCWaypoint id="ENAL">
<ATCWaypointType>Airport</ATCWaypointType>
<WorldPosition>N62° 33' 45.00",E06° 07' 11.00",+00</WorldPosition>
<ICAO>
<ICAOIdent>ENAL</ICAOIdent>
</ICAO>
</ATCWaypoint>
</FlightPlan.FlightPlan>
</SimBase.Document>
----------------------------------------
Selected Flight Plan
----------------------------------------

Adjusted data...

XML Flight Plan successfully adjusted for PF3.
OPR File map= emty

ADJ file map=
adj. flightplans from 06.01-20.5.

Thor
Author:  Dave March [ Fri May 21, 2021 6:07 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Is that the only file in the folder? Why don't you ZIP and ATTACH them, it makes it so much easier for me.
Author:  trening [ Fri May 21, 2021 10:03 pm ]
Post subject:  Re: Pf3 runtime error 9 after updating to 3.10.50
Sorry, i can`t send them here, but i will try via your email.

Thor
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited