OnCourse Software
http://www.ocs-support.co.uk/forums/

Ctrl+Shft+W not working
http://www.ocs-support.co.uk/forums/viewtopic.php?t=2547		 Page 1 of 2
Author:  TheDuke [ Fri Apr 28, 2017 11:04 am ]
Post subject:  Ctrl+Shft+W not working
On a flight out of LEBL the wind (and ATIS) gave RWY02. Given the very long taxi to the HP RWY02 and the fact that the wind made 25R also an option, I decided to go for RWY25R. So I waited for the taxi instructions from ATC to hit Ctrl+Shft+W. Nothing but my VCP replying to the taxi-instructions which was a very long one. When he was finished I tried Ctrl+Shft+W again. Nothing again.

So I had no other option then taking the 20 minutes taxi run to the HP of RWY02.

TGS is not active, by the way.

What have I done wrong?

Dirk
Author:  ThomasAH [ Fri Apr 28, 2017 11:25 am ]
Post subject:  Re: Ctrl+Shft+W not working
TheDuke wrote: *  Fri Apr 28, 2017 11:04 am
So I waited for the taxi instructions from ATC to hit Ctrl+Shft+W. Nothing but my VCP replying to the taxi-instructions which was a very long one.
Code: Select all
27-4-2017 14:40:02: 030 - Transcript: '  Hotel   Tango 11  Juliet   Kilo   Tango 13  Tango 14
    Sierra 14  Mike 10  November 7  November 6  Delta 3  Delta 2  Delta 1  Echo 1  Kilo 6
    holding point, runway 02 Air Berlin 482  '
27-4-2017 14:40:36: 220 - ****** HotKey #13 detected!
27-4-2017 14:40:36: 220 - FS Screen :  Comms busy, try again in a few seconds...
TheDuke wrote: *  Fri Apr 28, 2017 11:04 am
When he was finished I tried Ctrl+Shft+W again. Nothing again.
PF3 detected that:
Code: Select all
27-4-2017 14:40:51: 180 - ****** HotKey #13 detected!
27-4-2017 14:40:54: 210 - FS Screen :  Use runway 2 - ILS ? - C/S/Y for Yes, or C/S/N for No

27-4-2017 14:41:21: 910 - ****** HotKey #13 detected!
27-4-2017 14:41:24: 260 - FS Screen :  Use runway 2 - ILS ? - C/S/Y for Yes, or C/S/N for No
At this point you should use Ctrl-Shift-N for No to switch through the runways and Ctrl-Shift-Y for Yes to confirm the new runway.

Do you see these messages on your screen?
TheDuke wrote: *  Fri Apr 28, 2017 11:04 am
TGS is not active, by the way.
This is what I thought at first :)

P.S.: To avoid having to wait for the long taxi instructions, I now use VCP mode #0 and switch to mode #2 when I get the correct runway.

P.P.S.: It was "only" ten minutes:
Code: Select all
27-4-2017 14:51:40: 700 - Transcript: 'Air Berlin 482 Contact Tower on 118.1  '
Author:  TheDuke [ Thu May 11, 2017 2:10 pm ]
Post subject:  Re: Ctrl+Shft+W not working
ThomasAH wrote: *  Fri Apr 28, 2017 11:25 am
Do you see these messages on your screen?
Nope. Nothing on my screens. Not on the PC (P3D) and not in Remote text on the Notebook.

Dirk
Author:  ThomasAH [ Thu May 11, 2017 5:22 pm ]
Post subject:  Re: Ctrl+Shft+W not working
TheDuke wrote: *  Thu May 11, 2017 2:10 pm
ThomasAH wrote: *  Fri Apr 28, 2017 11:25 am
Do you see these messages on your screen?
Nope. Nothing on my screens. Not on the PC (P3D) and not in Remote text on the Notebook.
Can you try without using Remote Text? (e.g. for requesting a different runway before take-off, you have to disable TGS for that)
- Do regular PF3 message appear in the sim?
- Do these runway selection prompts appear?
Author:  helix1250 [ Sun May 14, 2017 8:09 pm ]
Post subject:  Re: Ctrl+Shft+W not working
Hi Everyone,

I think I had this issue last night! I was flying out of EGBB and Atis reported winds from 200, so I anticipated a rwy 15 departure.

When I requested taxi I was given rwy 33, so I waited and deactivated the TGS and then did Ctrl+shft+w. But nothing happened, I never had any text appear on my screen at all. So I run with a 15 departure as there was no AI around.

My logs are attached, I have added my last one and the old one, just in case I have my days mixed up or have flown since!

Regards Rob
Author:  Dave March [ Sun May 14, 2017 9:50 pm ]
Post subject:  Re: Ctrl+Shft+W not working
According to the log you never deactivated TGS, so Ctrl+Shift+W would not work
Author:  helix1250 [ Sun May 14, 2017 10:16 pm ]
Post subject:  Re: Ctrl+Shft+W not working
How very odd, I could have sworn I see TGS deactivated appear on my screen. Hey ho never mind no harm come to my passengers :)

But Still strange why it picked rwy 33 with the winds and when as far as I could see AI aircraft wasn't anywhere near.

But thank you Dave and the team for a such a great program, and every update brings such great additional features :)

Rob
Author:  TheDuke [ Fri May 19, 2017 1:35 pm ]
Post subject:  Re: Ctrl+Shft+W not working
ThomasAH wrote: *  Thu May 11, 2017 5:22 pm
Can you try without using Remote Text? (e.g. for requesting a different runway before take-off, you have to disable TGS for that)
- Do regular PF3 message appear in the sim?
- Do these runway selection prompts appear?
Sorry Thomas, sometimes I am away for longer periods.
AND...
Seen the comms with Rob in this post I started to think.... In PF3 Option1 I have TGS off and Close Caption ON, but... Faster ATC and Faster readback are checked. Could it be that they both should be off as well?

I'll give it a try with Remote Text off and see what happens and let you know.

Dirk
Author:  TheDuke [ Fri May 19, 2017 2:24 pm ]
Post subject:  Re: Ctrl+Shft+W not working
ThomasAH wrote: *  Thu May 11, 2017 5:22 pm
Can you try without using Remote Text? (e.g. for requesting a different runway before take-off, you have to disable TGS for that)
- Do regular PF3 message appear in the sim?
- Do these runway selection prompts appear?
Sorry Thomas, I was away for some time.

I tested it with the Remote Text OFF. It works fine in the FSUIPC popup.

Then I restarted PF3 and went through the process again. Just like in the previous test, after the taxi instruction was confirmed by my VCP I hit Ctrl+Shft+W and nothing happens. Not in the Remote Text and not on my PC.

Dirk
Author:  Dave March [ Fri May 19, 2017 2:50 pm ]
Post subject:  Re: Ctrl+Shft+W not working
Quote:
my VCP I hit Ctrl+Shft+W and nothing happens
VCP doesn't do that... you have to request a runway change
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited