OnCourse Software
http://www.ocs-support.co.uk/forums/

ATC DLL Crash
http://www.ocs-support.co.uk/forums/viewtopic.php?t=2541		 Page 1 of 1
Author:  mllgrennman [ Tue Apr 25, 2017 1:05 am ]
Post subject:  ATC DLL Crash
I'm getting a CTD reported as ATC DLL fault module. My initial research says it's due to conflicting ATC frequencies...

I'm including the logs...any help is appreciated.

Thanks.
Author:  johnhinson [ Tue Apr 25, 2017 4:18 am ]
Post subject:  Re: ATC DLL Crash
ATC.DLL is part of FS's inbuilt ATC system (not PF3), but of course it continues to run silently in the background when using alternative systems.

This may help:
https://www.avsim.com/forums/topic/2730 ... ing-error/

John
Author:  mllgrennman [ Tue Apr 25, 2017 11:29 am ]
Post subject:  Re: ATC DLL Crash
I'll try "ATC=off" in FSUIPC init as suggested...Thanks

But Ive been flying FS9 since it first came out and this is the first time this ever happened...

I must have done something?
Author:  dtsakiris [ Tue Apr 25, 2017 12:44 pm ]
Post subject:  Re: ATC DLL Crash
mllgrennman wrote: *  Tue Apr 25, 2017 1:05 am
I'm getting a CTD reported as ATC DLL fault module. My initial research says it's due to conflicting ATC frequencies...

I'm including the logs...any help is appreciated.

Thanks.
Are you using AI Controller? In my case, AIC led to CTDs.
Author:  johnhinson [ Tue Apr 25, 2017 5:00 pm ]
Post subject:  Re: ATC DLL Crash
mllgrennman wrote: *  Tue Apr 25, 2017 11:29 am
I'll try "ATC=off" in FSUIPC init as suggested...Thanks

But Ive been flying FS9 since it first came out and this is the first time this ever happened...

I must have done something?
I have never had the issue myself but from that discussion several people have (while using another third-party programme at least). There are other things that can cause the same error, irrespective of third-party ATC add-ons, so the conicidence of using such may just be a red herring.

You might find my page at http://www.adventure-unlimited.org/faultfinding.php useful for tracing this and other issues.

John
Author:  mllgrennman [ Tue Apr 25, 2017 9:19 pm ]
Post subject:  Re: ATC DLL Crash
Many discussions advise to set FSUIPC.ini to "removeatc=yes"

Ive been up and down the list but I dont see it?


[General]
UpdatedByVersion=3999z9b
TCASid=Flight
TCASrange=40
TrafficScanPerFrame=10
AxesWrongRange=No
AxisCalibration=No
CentredDialogue=Yes
ShowMultilineWindow=No
SuppressSingleline=Yes
SuppressMultilineFS=Yes
ClearWeatherDynamics=Yes
OwnWeatherChanges=No
WeatherReadInterval=4
MoveBGLvariables=Yes
TimeForSelect=4
WeatherReadsFast=No
LuaRerunDelay=66
MainMenu=&Modules
SubMenu=&FSUIPC ...
History=60E9SYBOAK2RJTDS7PH19
WindSmoothing=No
AutoTaxiWind=No
PropTaxiWind=No
TimeSetMode=Partial
WhiteMessages=No
ThrottleSyncAll=No
GraduatedVisibility=No
LowerVisAltitude=0
UpperVisAltitude=25000
UpperVisibility=6000
GenerateCirrus=Yes
WindShearSharp=No
UpperWindGusts=No
ExtendMetarMaxVis=Yes
CorrectVSsign=Yes
MouseWheelTrim=No
MouseWheelTrimSpeed=1
BrakeReleaseThreshold=75
AxisInterceptIfDirect=No
DontResetAxes=No
DisconnTrimForAP=No
ZeroElevForAPAlt=No
AutoClearWeather=Yes
ExtendTopWind=Yes
WindSmoothness=5
SmoothPressure=No
PressureSmoothness=5
SmoothVisibility=No
VisibilitySmoothness=2
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
MinimumVisibility=0
MaximumVisibilityFewClouds=0
MaximumVisibility=0
MaximumVisibilityOvercast=0
MaximumVisibilityRainy=0
OneCloudLayer=No
ThinClouds=No
ThinThunderClouds=No
CloudThinness=1000
ThunderCloudThinness=10000
CloudTurbulence=No
CloudIcing=No
WindTurbulence=No
SuppressAllGusts=No
ExternalOptionControl=Yes
AutoTuneADF=No
KeepFS98CloudCover=No
ShowPMcontrols=No
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
StopAutoFuel=No
TrapUserInterrupt=Yes
NavFreq50KHz=No
ClockSync=No
SmoothIAS=Yes
SetVisUpperAlt=No
VisUpperAltLimit=6000
MaxIce=3
MinIce=-1
WindSmoothingDelay=0
WindSmoothAirborneOnly=No
LimitWindVariance=No
VisSmoothingDelay=0
VisSmoothAirborneOnly=No
TrafficControlDirect=Yes
SuppressCloudTurbulence=No
SuppressWindTurbulence=No
SpoilerIncrement=512
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
FixWindows=No
FixControlAccel=No
Author:  Dan77 [ Tue Apr 25, 2017 9:51 pm ]
Post subject:  Re: ATC DLL Crash
My understanding from Ray's post (though I haven't tried it) is that you add that line to the [General] section and save the file. See here.
Author:  mllgrennman [ Thu Apr 27, 2017 3:31 am ]
Post subject:  Re: ATC DLL Crash
Success!!!

Line added...CTD solved...

This was a great example of the use of forums at its best!

I NEVER would have been able to figure this out without all of your input...

Incidentally...Removing the ATC not only makes the sim more sturdy...but it makes using PF3 more tidy...

I highly recommend it...

Thanks again...
Author:  ThomasAH [ Thu Apr 27, 2017 7:25 am ]
Post subject:  Re: ATC DLL Crash
mllgrennman wrote: *  Thu Apr 27, 2017 3:31 am
it makes using PF3 more tidy...
I wish I had have this possibility in FSX, too. The kneeboard sometimes contains the communication with default ATC.
Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited