OnCourse Software
http://www.ocs-support.co.uk/forums/

TGS does not re-active with the key "1" with any version.
http://www.ocs-support.co.uk/forums/viewtopic.php?t=1934		 Page 1 of 2
Author:  drumsart [ Sun Mar 13, 2016 4:33 pm ]
Post subject:  TGS does not re-active with the key "1" with any version.
I open a new topic about this because it seems not fixed.

This is what happens :

-CP Mode 2
-All Taxi Guidance System ticked.
-After taxi clearance I push key "1" : "TGS deactivated" message ok.
-After changing the runway, 2 cases are possible.
-1/TGS re-active himself which is correct or :
-2/TGS don't re-active and display again the "TGS deactivated" message instead "TGS actived" and of course if I push the key "1" to re-activate, it don't work.

Now with no runway change, I just toggle the key "1" off and on.
-Push key "1" : "TGS deactivated" message ok.
-Push key "1" again to reactivate TGS, it never don't work. TGS stays deactivated with the same "TGS deactivated message !"

Am'I alone with this problem ? Any clue to solve that ?

Thanks in advance, Logs attached

Regards,

Richard Portier
Author:  helix1250 [ Sun Mar 13, 2016 5:41 pm ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
Hi drumsart,

I have had sporadic operation with TGS in all VCP options when taxing out to a runway. But after landing it's only ever worked/re-activated once after landing and being given my taxi clearance to gate and directions.

I have tried pressing key 1 or in my case shift & F1 as I had to move the key press due to a prior key bond I have. I never get TGS to activate, I'm lucky as I have routes I fly for my VA where I know the airport layout fairly well and can get to my stand without TGS.

But I agree something isn't quite right, but I know it will be looked into and with any luck sorted out :)

Rob
Author:  drumsart [ Sun Mar 13, 2016 5:52 pm ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
Thanks Rob to confirm there is maybe some "glitch" there.

Regards,

Richard Portier
Author:  drumsart [ Fri Mar 18, 2016 2:43 pm ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
Hi,

Just to know if Dave is aware of this problem. I have had no response from the developer on it.

Thank you in advance,

Regards,

Richard Portier
Author:  Dave March [ Fri Mar 18, 2016 7:35 pm ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
Yes I'm aware of your post. All working fine here so I need to dig deeper ;)
Author:  drumsart [ Sat Mar 19, 2016 1:46 am ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
Thank you Dave for great support.

Regards,

Richard Portier
Author:  drumsart [ Sat Mar 19, 2016 3:01 am ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
If this can help : Fsx Acc, Asn, Track Ir, PF3, Saitek Pro Flight Yoke System/Rudder/Quadrant, Windows 7U64.

Regards,

Richard Portier
Author:  RALF9636 [ Sat Mar 19, 2016 3:01 pm ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
Same problem here.

I have TGS activated in the options. I deactivated TGS on my way to the runway for takeoff. After landing TGS was turned off and I could not reactivate it.

First issue here of course is that reactivating does not work.

The other question in this context: Shouldn't TGS be activated automatically as defined in the options after landing even though it was manually turned off before takeoff? I asked this before but did not receive a definite answer.

Logs attached. Hope this helps.

Ralf
Author:  Dave March [ Sat Mar 19, 2016 3:22 pm ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
RALF9636 wrote:
Same problem here.

I have TGS activated in the options. I deactivated TGS on my way to the runway for takeoff. After landing TGS was turned off and I could not reactivate it.

First issue here of course is that reactivating does not work.

The other question in this context: Shouldn't TGS be activated automatically as defined in the options after landing even though it was manually turned off before takeoff? I asked this before but did not receive a definite answer.

Logs attached. Hope this helps.

Ralf
After landing TGS only becomes active if/when given taxi instructions
Author:  RALF9636 [ Sat Mar 19, 2016 3:24 pm ]
Post subject:  Re: TGS does not re-active with the key "1" with any version
dmarch wrote:

After landing TGS only becomes active if/when given taxi instructions
Well I received taxi instructions, but TGS did not become active. And couldn't be activated with the hotkey.
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited