| OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
| Not getting Clearance to lift off. http://www.ocs-support.co.uk/forums/viewtopic.php?t=1689 |
Page 1 of 1 |
| Author: | Ozmodion [ Sun Sep 13, 2015 4:48 pm ] |
| Post subject: | Not getting Clearance to lift off. |
| Hi all, Im doing everything i should in PFE with the converting my ADV process, connecting to FSX, contacting ground and getting Taxi clearance, the Guide is taking me to my holding point, and then after that....nothing. I dont get clearance to take off. I am on VCP 2 so the copilot handles my radios, but nothing. I sit there for ages on the holding point waiting....i press 0 again to hopefully get PFE to kick in but just get taxi instructions again. please somebody tell me what im doing wrong so i can get this program working again as the default american voice of the FSX ATC is killing me. im flying around the world in 80 flights and all im getting is american ATC everywhere, its killing the immersion. |
| Author: | Dave March [ Sun Sep 13, 2015 5:55 pm ] |
| Post subject: | Re: Not getting Clearance to lift off. |
| When tuned to Tower, at your departure airport, the following commands are available 0 = Initial Check-in... ready to TAXI to RUNWAY 6 = Initial Check-in... ready for TAKEOFF W = Request other Runway N = Show another Runway Y = Accept that Runway |
| Author: | JohnF [ Mon Oct 26, 2015 10:12 pm ] |
| Post subject: | Re: Not getting Clearance to lift off. |
| Dave I press the 6 key on reaching the holding point but no message is sent. Radio is tuned to the Tower. John |
| Author: | Dave March [ Tue Oct 27, 2015 6:58 am ] |
| Post subject: | Re: Not getting Clearance to lift off. |
| John Please don't hi-Jack an old post with a question, it's a little confusing. Please email the debug log for this flight. If you've done another flight since this problem you need to send the old log, but if you've done more than one more flight you need to recreate the problem and then send me the log. Sent from my Dumbphone |
| Author: | JohnF [ Tue Oct 27, 2015 12:12 pm ] |
| Post subject: | Re: Not getting Clearance to lift off. |
| As I was getting a simialr problem to Ozmodion so I thought it a good place to put my query. He has not replied so I don't know if your answer worked for him. John |
| Author: | Dave March [ Tue Oct 27, 2015 3:23 pm ] |
| Post subject: | Re: Not getting Clearance to lift off. |
| I understand why you did it, I'm just asking you not to. Have you sent me a log because I haven't received it yet? |
| Author: | JohnF [ Tue Oct 27, 2015 4:01 pm ] |
| Post subject: | Re: Not getting Clearance to lift off. |
| No, I have the hotkey problem so reckon that should be fixed first. Yes? John |
| Page 1 of 1 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited | |