OnCourse Software

Welcome to our Product Support Forums

PFE disconnects as client with WideFS with Err 53 at Loc; 0

Post Reply   Page 1 of 1  [ 3 posts ]
Author Message
SleepyWeltonBoy
Post subject: PFE disconnects as client with WideFS with Err 53 at Loc; 0
Posted: Sat Feb 28, 2015 5:38 pm
Offline
 
Posts: 5
Joined: Wed Feb 25, 2015 8:01 pm
 
I am trying to setup PFE as a client to the FSX server using WideFS.

Whenever I connect to FS from the PFE client, a message appears in the FSX screen that 'PFE is intializing', followed promptly by 'PFE has a problem and will disconnect'.

The log file reads as follows:-
28/02/2015 17:23:50: 480 - PFE Started... 2015022862630:866
28/02/2015 17:23:50: 480 - PFE Version: 2.15.0
28/02/2015 17:23:50: 490 - APLC Version: 1.0.1
28/02/2015 17:23:50: 490 - FS Version: FSX
28/02/2015 17:23:50: 490 - FSUIPC Version: 4.939B

28/02/2015 17:23:50: 490 - Selected Voice : 0
28/02/2015 17:23:50: 490 - Selected Accent: 4

28/02/2015 17:23:50: PFE Expansion Pack Voice Sets NOT Installed
28/02/2015 17:23:50: PFE Expansion Pack Voice Set Enhancements NOT Installed

-----------------------------------
PF2000 CFG Adventure Voice Settings
-----------------------------------
ProFlightA - African=0
ProFlightB - Arabian=0
ProFlightC - Asian=4
ProFlightD - Australian=2
ProFlightE - British=7
ProFlightF - Canadian=0
ProFlightG - Caribbean=0
ProFlightH - Dutch=0
ProFlightI - French=4
ProFlightJ - FrenchCanadian=0
ProFlightK - German=7
ProFlightL - Greek=0
ProFlightM - Hindi=1
ProFlightN - Hungarian=0
ProFlightO - Indonesian=0
ProFlightP - Irish=1
ProFlightQ - Italian=0
ProFlightR - LatinAmerican=0
ProFlightS - Nordic=2
ProFlightT - Portuguese=0
ProFlightU - Russian=0
ProFlightV - Spanish=4
ProFlightW - USGeneric=9
ProFlightX - USMidWestern=0
ProFlightY - USNorthern=0
ProFlightZ - USSouthern=3
-----------------------------------
End of PF2000 CFG Settings
-----------------------------------

-----------------------------------
Old and New Voice Files Available
-----------------------------------
ProFlightA Orig: 0 New: 0
ProFlightB Orig: 0 New: 0
ProFlightC Orig: 4 New: 0
ProFlightD Orig: 2 New: 0
ProFlightE Orig: 7 New: 0
ProFlightF Orig: 0 New: 0
ProFlightG Orig: 0 New: 0
ProFlightH Orig: 0 New: 0
ProFlightI Orig: 4 New: 0
ProFlightJ Orig: 0 New: 0
ProFlightK Orig: 7 New: 0
ProFlightL Orig: 0 New: 0
ProFlightM Orig: 1 New: 0
ProFlightN Orig: 0 New: 0
ProFlightO Orig: 0 New: 0
ProFlightP Orig: 1 New: 0
ProFlightQ Orig: 0 New: 0
ProFlightR Orig: 0 New: 0
ProFlightS Orig: 2 New: 0
ProFlightT Orig: 0 New: 0
ProFlightU Orig: 0 New: 0
ProFlightV Orig: 4 New: 0
ProFlightW Orig: 9 New: 0
ProFlightX Orig: 0 New: 0
ProFlightY Orig: 0 New: 0
ProFlightZ Orig: 3 New: 0
-----------------------------------
End of Available Voice Files
-----------------------------------

28/02/2015 17:23:50: 500 - Turn Connection flag ON
28/02/2015 17:23:50: 560 - --> ****** SetupDirectsSound
28/02/2015 17:23:50: 560 - Turn Connection flag ON
28/02/2015 17:23:50: 600 - FS Screen : PFE Initialising...
28/02/2015 17:23:51: 600 - --> ****** PF_Controller
28/02/2015 17:23:51: 600 - FS Screen : ****** PFE has a problem and will disconnect! ******
28/02/2015 17:24:06: 990 - --> ****** SaveRestart
28/02/2015 17:24:07: 080 - Unable to access Kneeboard file due to a path error (see next entry)
28/02/2015 17:24:07: 080 - Path used:
28/02/2015 17:24:07: 080 - --> ****** ResetHotkeys
28/02/2015 17:24:07: 080 - PF Loop Exited due to FS Disconnected!
28/02/2015 17:24:07: 080 - --> ****** DisconnectFromFS
28/02/2015 17:24:07: 080 - ****** PFE Disconnected from FS
28/02/2015 17:24:07: 080 - Turn Connection flag OFF

28/02/2015 17:24:07: 080 - Err 53 at Loc: 0

It does not look as if PFE identifies the FSX path. Any thoughts, please?

I understand that use of WideFS should be pretty straightforward, i.e. run WideClient then Connect FS in PFE.


Top
Profile Quote
SleepyWeltonBoy
Post subject: Re: PFE disconnects as client with WideFS with Err 53 at Loc
Posted: Sun Mar 01, 2015 1:54 pm
Offline
 
Posts: 5
Joined: Wed Feb 25, 2015 8:01 pm
 
Problem solved. I uninstalled/reinstalled then rebuilt the database.

WideFS has been setup correctly. When I run WideClient and connect to FS, the aforementioned no longer occurs and I connect to FS properly and communications are now fine.

Problem solved and I don't want to waste your precious time, Dave!


Top
Profile Quote
Dave March
Post subject: Re: PFE disconnects as client with WideFS with Err 53 at Loc
Posted: Sun Mar 01, 2015 5:25 pm
Site Admin
Offline
 
Posts: 6095
Joined: Mon May 18, 2009 6:22 pm
Location: Sawtry, Cambridgeshire. UK
Contact: Website
 
well done and thanks for the update

_________________

Cheers

Dave March

Email: dmarch@oncourse-software.co.uk

I don't know if my memory is getting worse as I get older...
...I just can't remember how it used to be!

[ img ]


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 1 of 1  [ 3 posts ]
Return to “PFE Support”
Jump to: