| OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
| No Scottish Center http://www.ocs-support.co.uk/forums/viewtopic.php?t=3385 |
Page 2 of 3 |
| Author: | ridgeandgable [ Wed Jan 06, 2021 1:45 pm ] |
| Post subject: | Re: No Scottish Center |
| Hi Dave I usually just run PF3 in normal mode, and usually I just double click the TGS_Display icon and everything works from eham just not Edinburgh, I can confirm I do have TGS.exe in my main folder. So do I need to click that before or after tgs_display? and I take it I need to run in Admin mode? |
| Author: | Dave March [ Wed Jan 06, 2021 1:56 pm ] |
| Post subject: | Re: No Scottish Center |
| You don't need to touch TGS.EXE... PF3 starts that when required. According to your logs the TGS.EXE hasn't run since 29/12 so it's not just Edinburgh! |
| Author: | ridgeandgable [ Wed Jan 06, 2021 2:00 pm ] |
| Post subject: | Re: No Scottish Center |
| Ah ok I'll try again tonight running in Admin Mode and see if that works |
| Author: | ridgeandgable [ Wed Jan 06, 2021 3:14 pm ] |
| Post subject: | Re: No Scottish Center |
| Ok just tried it again.. P3D 5.1 As admin PF3 As Admin Started TGS-Display as Admin Loaded flight, Asked for clearance (Copilot did, they don't listen to me  ), got clearance, start up, then asked for taxi and granted to runway 24, no TGS output. All four green lights are on the gauge, and the green dot is showing just off to the right, but nothing else. |
| Author: | Dave March [ Wed Jan 06, 2021 3:31 pm ] |
| Post subject: | Re: No Scottish Center |
| That sounds it's working to me. When you first start tgs display it doesn't show any distance bars and no directional pointer Sent from my mobile using Tapatalk |
| Author: | ridgeandgable [ Wed Jan 06, 2021 3:53 pm ] |
| Post subject: | Re: No Scottish Center |
| But shouldn't the arrow move to direct me to the runway? or give voice guidance? The lights don't change and the green dot doesn't move, and no voice? Maybe i'm doing something wrong, although I am awake today |
| Author: | Dave March [ Wed Jan 06, 2021 6:46 pm ] |
| Post subject: | Re: No Scottish Center |
| Yes of course it should... It looks like TGS had started then stopped. And you say this only happens at Edinburgh? Please attach your latest debug log Sent from my mobile using Tapatalk |
| Author: | ridgeandgable [ Thu Jan 07, 2021 1:38 am ] |
| Post subject: | Re: No Scottish Center |
| Hi Dave I can confirm it didn't work tonight either from EHAM to EGPH, I did the 4 green direction lights but no movement or voice instructions, I ran PF3 as Admin and the TGS_Display as admin on P3D 5.1 in windowed mode if that helps I've attached the log from this flight for you. Thankfully I had GSX to fall back on and used the follow car instead  navigating EHAM taxiways is hell :p |
| Author: | ridgeandgable [ Fri Jan 08, 2021 5:32 pm ] |
| Post subject: | Re: No Scottish Center |
| Is there anything else to try? |
| Author: | Dave March [ Sat Jan 09, 2021 9:19 pm ] |
| Post subject: | Re: No Scottish Center |
| I think the problem is you're not rogering ANY ATC instructions. If you're running with COP Mode off then YOU have to manually Roger all ATC instructions |
| Page 2 of 3 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited | |