OnCourse Software

Welcome to our Product Support Forums

Problem after resuming Flight

PLEASE NOTE:

If you are reporting an issue with PF3 please remember to Zip and attach the Debug_Monitor.log file from your PF3\Logs folder. Thank you.

Post Reply   Page 2 of 3  [ 24 posts ]
Jump to page « 1 2 3 »
Author Message
Dan77
Post subject: Re: Problem after resuming Flight
Posted: Sat Apr 14, 2018 11:22 pm
Offline
 
Posts: 758
Joined: Sun May 05, 2013 2:22 am
 
Captcoop wrote: *  Fri Apr 13, 2018 12:40 pm
On every flight I have resumed I always reply "Leaving FL** for the FL that I was cleared to on Take Off.
As far as I can tell, this affects flights that began with a SID and are then interrupted and resumed. I posted the issue on the Beta forum and hopefully it will be addressed in a maintenance release.

_________________

Dan

[ img ]


Top
Profile Quote
Captcoop
Post subject: Re: Problem after resuming Flight
Posted: Sun Apr 15, 2018 12:32 pm
Offline
 
Posts: 38
Joined: Thu Mar 15, 2018 8:46 pm
 
Thank you for this.

I find it strange that other users have'nt reported this , am I the only one with this problem?


Top
Profile Quote
ThomasAH
Post subject: Re: Problem after resuming Flight
Posted: Sun Apr 15, 2018 6:16 pm
Offline
 
Posts: 988
Joined: Tue Dec 24, 2013 12:27 pm
 
Captcoop wrote: *  Sun Apr 15, 2018 12:32 pm
I find it strange that other users have'nt reported this , am I the only one with this problem?
I have done the most testing on resuming flights (I had a bad sound card driver causing FSX freezes when PF3 was developed, but since then also used it to intentionally save my flight and continue the next day), but I seldom use SIDs, so this may have escaped my attention.

_________________

[ img ]


Top
Profile Quote
ThomasAH
Post subject: Re: Problem after resuming Flight
Posted: Sun Apr 15, 2018 9:56 pm
Offline
 
Posts: 988
Joined: Tue Dec 24, 2013 12:27 pm
 
ThomasAH wrote: *  Sun Apr 15, 2018 6:16 pm
Captcoop wrote: *  Sun Apr 15, 2018 12:32 pm
I find it strange that other users have'nt reported this , am I the only one with this problem?
I have done the most testing on resuming flights (I had a bad sound card driver causing FSX freezes when PF3 was developed, but since then also used it to intentionally save my flight and continue the next day), but I seldom use SIDs, so this may have escaped my attention.
... but I just checked, I have tested this with SIDs, with and without flexible altitudes. There had been bugs with that, but they were fixed in release 3.3.4

I'll add the details to the beta issue to find and squash this thing :)

_________________

[ img ]


Top
Profile Quote
Captcoop
Post subject: Re: Problem after resuming Flight
Posted: Mon Apr 16, 2018 11:14 am
Offline
 
Posts: 38
Joined: Thu Mar 15, 2018 8:46 pm
 
Hi again.

I just did a flight with no SID and as I expected the same happened. I do not believe that SID/STAR's have anything to do with the problem.

When I restarted the flight I got a message "Restarting EGPF-EGLL Flight" etc.
Should this say Resuming Flight.

I also always get the ACARS box with the Freq's for my departure Airport and my Radio is tuned to Clearance for a few moments then it corrects.

FP3 restarts at the beginning of my flight , and not at my current position.

I believe that the problem is in the saving of the Flight or the reloading of it.

Please could Dave have a look at this.

Thanks

Steve Cooper


Top
Profile Quote
Captcoop
Post subject: Re: Problem after resuming Flight
Posted: Tue Apr 17, 2018 7:38 pm
Offline
 
Posts: 38
Joined: Thu Mar 15, 2018 8:46 pm
 
Hi
I ran the PF3 validation program and it reported that 3 Files were missing! I list them below

The file 'SCLabel.ocx' does not appear to be registered!
The file 'SkinCrafter2.dll' does not appear to be registered!
The file 'mfc42.dll' does not appear to be registered!
Start date/time: 17-04-2018 19:20:44
End date/time : 17-04-2018 19:22:43

Total - 3 MISSING/UNREGISTERED FILES !!

Could this be causing my problems ?

Regards

Steve Cooper


Top
Profile Quote
Dave Leesley
Post subject: Re: Problem after resuming Flight
Posted: Wed Apr 18, 2018 9:51 am
Offline
 
Posts: 1325
Joined: Fri May 22, 2009 8:27 pm
Location: Yorkshire
 
Captcoop wrote: *  Tue Apr 17, 2018 7:38 pm
Hi
I ran the PF3 validation program and it reported that 3 Files were missing! I list them below

The file 'SCLabel.ocx' does not appear to be registered!
The file 'SkinCrafter2.dll' does not appear to be registered!
The file 'mfc42.dll' does not appear to be registered!
Start date/time: 17-04-2018 19:20:44
End date/time : 17-04-2018 19:22:43

Total - 3 MISSING/UNREGISTERED FILES !!

Could this be causing my problems ?

Regards

Steve Cooper
Quite probably...yes.
Try running cumulative updater to try and correct the issue you describe above, or re-install but not in program files and remember to deactivate your licence first if you go down this route.

_________________

Regards Dave
Forum Moderator

[ img ]
[ img ]


Top
Profile Quote
Captcoop
Post subject: Re: Problem after resuming Flight
Posted: Wed Apr 18, 2018 7:30 pm
Offline
 
Posts: 38
Joined: Thu Mar 15, 2018 8:46 pm
 
How do I run the Cumulative Updater ?


Top
Profile Quote
Dave Leesley
Post subject: Re: Problem after resuming Flight
Posted: Wed Apr 18, 2018 8:37 pm
Offline
 
Posts: 1325
Joined: Fri May 22, 2009 8:27 pm
Location: Yorkshire
 
Captcoop wrote: *  Wed Apr 18, 2018 7:30 pm
How do I run the Cumulative Updater ?
viewtopic.php?f=8&t=2777

Try this.

_________________

Regards Dave
Forum Moderator

[ img ]
[ img ]


Top
Profile Quote
Captcoop
Post subject: Re: Problem after resuming Flight
Posted: Wed Apr 18, 2018 8:49 pm
Offline
 
Posts: 38
Joined: Thu Mar 15, 2018 8:46 pm
 
Things are now a whole lot worse!!

Tried to re-Install but uninstaller wouldn't work, said can only uninstall on a 64 bit machine ! I am on Vista 32bit.

Did a re-install without uninstalling. All seemed OK but when I tried to use got following message "frmFPAjust (Load 13-226)"

I CANNOT USE FP3 AT ALL !!

I saw a message that Microsoft NET Framework 4.03 or higher is required. I have 4.5.2

I am very unhappy at the amount of time I am spending trying to get this to work, this is not freeware I paid for it.

Please how do I do a complete uninstall and attempt to get it back how it was.

I have looked at the 3 files mentioned on the report and all are System 32 Files, on my Computer for many years.

Help please

Steve Cooper


Top
Profile Quote
Display: Sort by: Direction:
Post Reply   Page 2 of 3  [ 24 posts ]
Return to “PF3-ATC at its best” | Jump to page « 1 2 3 »
Jump to: