| OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
| TGS AI control suggestion http://www.ocs-support.co.uk/forums/viewtopic.php?t=2907 |
Page 1 of 2 |
| Author: | massimo390 [ Sat Jun 09, 2018 2:05 pm ] |
| Post subject: | TGS AI control suggestion |
| I read that PF3 stops aircraft that are 400 mt from you in a 90 degree area left/right of your airplane. I have noticed that when you are holding short especially long holds being number 2,3,.. like in Gatwick Runway 08R for take off, you can see on your left window the AI behind you stopped way too far from you, I guess this is PF3 stopping them because they are within the 90 degree boundary area but it looks very very weird or unrealistic. My suggestion is to reduce this 400 mt control area to lets say 60 degrees from airplane axis which is great, and for the remaining 240 degrees make it something like 70 mt . This way you still stop aircraft that will be on your way but let the other ones following you get closer in a more realistic way. what do you think? |
| Author: | Dave March [ Sat Jun 09, 2018 3:23 pm ] |
| Post subject: | Re: TGS AI control suggestion |
| When you're stationary PF3's 'conflict monitor' will restart any AI aircraft previously stopped so if you're stationary and seeing other aircraft not moving it's not PF3/Conflict Monitor |
| Author: | massimo390 [ Mon Jun 11, 2018 12:27 am ] |
| Post subject: | Re: TGS AI control suggestion |
| Ok thanks Dave, I will check this again. I was pretty sure this was a PF3 issue, I will recreate the situation with high density traffic in Gatwick and see if the traffic behind me stops too far and get some pictures. |
| Author: | massimo390 [ Tue Jun 12, 2018 4:02 pm ] |
| Post subject: | Re: TGS AI control suggestion |
| Hi Dave, I checked. As you see the airplanes hold short of mine about 400 mts which is what is mentioned in your help file: "Basically we set up a boundary along our taxi route, arcing at approximately 400 meters in front of your aircraft and from side to side at -90 to +90 degrees of your current heading. Any AI aircraft that seem to be moving toward this boundary or actually entering it are stopped. They are then restarted once they are deemed not to be on a conflicting path..." If this is PF3 could you implement the ability to turn CM off once you reach the runway? PS: Love PF3 |
| Author: | massimo390 [ Tue Jun 12, 2018 4:07 pm ] |
| Post subject: | Re: TGS AI control suggestion |
| holding short at this point TGS is off maybe CM should be turned off automatically? |
| Author: | massimo390 [ Wed Jun 13, 2018 5:47 pm ] |
| Post subject: | Re: TGS AI control suggestion |
| I have Ultimate Traffic Live running together with PF3, maybe this is a UTL issue.. |
| Author: | ThomasAH [ Wed Jun 13, 2018 7:21 pm ] |
| Post subject: | Re: TGS AI control suggestion |
I don't think so, at least I have never noticed such a problem with utLive or UT2 (which works in the same way) and PF3. What your setting for "Pause CM below this ground speed" in the advanced settings? I have 10. |
| Author: | massimo390 [ Wed Jun 13, 2018 8:31 pm ] |
| Post subject: | Re: TGS AI control suggestion |
I have 12 with CM selected |
| Author: | massimo390 [ Wed Jun 13, 2018 8:37 pm ] |
| Post subject: | Re: TGS AI control suggestion |
| Before using PF3 and UTL I tried a couple other progrsms to conytol AI there were freeware and I don,t remember the name but maybe they changed some AI settings in Prepare 3D. I will check using only UTL...so I understand this only happens to me right? |
| Author: | ThomasAH [ Thu Jun 14, 2018 6:58 am ] |
| Post subject: | Re: TGS AI control suggestion |
I guess so. But others may have the same problem, but either did not notice or did not report it, or I did not see or do not remember their post. |
| Page 1 of 2 | All times are UTC+01:00 |
| Powered by phpBB® Forum Software © phpBB Limited | |