OnCourse Software http://www.ocs-support.co.uk/forums/ |
|
Being not able to get TGS working http://www.ocs-support.co.uk/forums/viewtopic.php?t=2783 |
Page 2 of 3 |
Author: | vololiberista [ Wed Dec 20, 2017 4:16 pm ] |
Post subject: | Re: Being not able to get TGS working |
This is how mine is set-up.
|
Author: | Dave Leesley [ Wed Dec 20, 2017 4:31 pm ] |
Post subject: | Re: Being not able to get TGS working |
This is mine too. [TGS] UseCM=1 PauseCM=10 TGSOn=1 Visual=1 Audio=1 HdgBug=1 ReduceVol=25 PromptAt=150 GateType=9 ATCTaxiSpd=1 ReadbackTaxiSpd=1 FinalPromptAt=50 |
Author: | pasterke [ Wed Dec 20, 2017 5:42 pm ] |
Post subject: | Re: Being not able to get TGS working |
and mine : [TGS] UseCM=1 PauseCM=10 TGSOn=1 Visual=1 Audio=1 HdgBug=0 ReduceVol=25 PromptAt=150 GateType=9 ATCTaxiSpd=1 ReadbackTaxiSpd=1 FinalPromptAt=50 |
Author: | wezhei [ Thu Dec 21, 2017 5:29 am ] |
Post subject: | Re: Being not able to get TGS working |
have to revise my previous statement, made a couple of tests now and it is reproducible, that MCE stops the TGS working, should i post it in the MCE forum as well or do you think i did something wrong with PF3. Even there is a slight difference w/o MCE i call ground on frq 121.87 and if the PF3 co pilote acknowledge the taxi clearance, PF3 states readback correct and starts than the TGS If i do the same with MCE i call ground on 121.87 my FO from MCE acknowlwde that, request than taxi clearance but have to switch frq to 121.80 got the taxi clearance via this freq; MCE FO acknowledges and thats it no TGS active heinz |
Author: | ThomasAH [ Thu Dec 21, 2017 7:13 am ] |
Post subject: | Re: Being not able to get TGS working |
I haven't checked your logs, but maybe MCE sends the "1" key for some reason, which disabled TGS. Can you try pressing "1" and see if TGS comes up again? Can someone of the beta team quickly check the logs for "HotKey #1"? |
Author: | wezhei [ Thu Dec 21, 2017 8:54 am ] |
Post subject: | Re: Being not able to get TGS working |
pressed the 1 key after getting taxi clearance no change, but what i recognised is that i got a beep (I've activated the beep whenever a hotkey is pressed) where no action was needed and also see no action performed |
Author: | RALF9636 [ Thu Dec 21, 2017 8:56 am ] |
Post subject: | Re: Being not able to get TGS working |
I guess the problem is that you changed the frequency from 121.87 to 121.8 before acknowledging the taxi clearance. If you send the readback of the taxi clearance on the wrong frequency TGS won't start of course. I have no idea why you changed that frequency. Can you elaborate on that? I never had such problems with MCE. |
Author: | wezhei [ Thu Dec 21, 2017 12:37 pm ] |
Post subject: | Re: Being not able to get TGS working |
maybe I misswrote this, it's not me who changed the freq, this was done by MCE itself |
Author: | RALF9636 [ Thu Dec 21, 2017 5:05 pm ] |
Post subject: | Re: Being not able to get TGS working |
Make sure you are on the correct Ground frequency when acknowledging the Taxi clearance. Please report back with the logs if you still get no TGS. |
Author: | wezhei [ Fri Dec 22, 2017 5:13 am ] |
Post subject: | Re: Being not able to get TGS working |
here my last logs |
Page 2 of 3 | All times are UTC+01:00 |
Powered by phpBB® Forum Software © phpBB Limited |