OnCourse Software

Welcome to our Product Support Forums
It is currently Fri Feb 23, 2018 1:26 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 62 posts ]  Go to page Previous 13 4 5 6 7 Next
Author Message
 Post subject: Re: Feature Requests
PostPosted: Fri Oct 27, 2017 6:48 pm 
Online
Site Admin

Joined: Mon May 18, 2009 6:22 pm
Posts: 3218
Quote:
Hi. It happens soon after I start my descent (which can be some time before actual approach of course). It can go 'Reduce speed to 310'; 'Reduce speed to 270'; 'Reduce speed to 290'; 'Reduce speed to 270', with just a few seconds between each one.

I will submit a log (I'll make a separate thread - doesn't seem appropriate here) when I get this again. But it would be good whatever to be able to limit things to say just one nag :-)

Thanks.
Are you sure you're running version 3.6?

_________________
Cheers

Dave March

Email: dmarch@oncourse-software.co.uk

Image


Top
   
 Post subject: Re: Feature Requests
PostPosted: Sat Nov 11, 2017 7:56 pm 
Offline

Joined: Fri Sep 15, 2017 11:15 pm
Posts: 7
Hi

Would it be possible to get the runway assignment when contacting clearance?
Would help deciding which way to face the jet after push back.

Thanks


Top
   
 Post subject: Re: Feature Requests
PostPosted: Mon Nov 13, 2017 8:00 pm 
Offline

Joined: Wed May 27, 2009 8:41 pm
Posts: 979
Location: LIMZ
Quote:
Hi

Would it be possible to get the runway assignment when contacting clearance?
Would help deciding which way to face the jet after push back.

Thanks
The general procedure is for ATC to clear you to push back tail left/right, nose left/right or facing North/South etc. You will only get the active runway when you report ready to taxi. Which is what already happens in PF3.The option of advising the crew which way to face at pushback has already been brought up. The problem is though that the voice set doesn't cover it very well. And, being an extra feature it's not something that can be done very quickly.
I would suggest that you look carefully at the airport chart to determine which way to face. I know that it can be a problem at complex airports. In which case if I get it wrong I plan an "escape" route if the taxi feature doesn't work. Also you don't have to taxi to the very last holding point either. I quite often jump the queue and press hotkey 6 at the holding point I arrive at.

_________________
Image


Top
   
 Post subject: Re: Feature Requests
PostPosted: Tue Nov 14, 2017 8:17 pm 
Offline

Joined: Mon Feb 08, 2016 9:29 pm
Posts: 332
Quote:
Hi

Would it be possible to get the runway assignment when contacting clearance?
Would help deciding which way to face the jet after push back.

Thanks
What I do is monitor the Ground frequency while I do the cockpit preparation. So I know the runway assignments for the AI aircraft which already is a hint which runway I will get. Only problematic can be airports with multiple active runways on either side of the terminal.
And remember, you can always ask for a different runway.

_________________
Image


Top
   
 Post subject: Re: Feature Requests
PostPosted: Wed Nov 15, 2017 4:45 pm 
Offline

Joined: Fri Sep 15, 2017 11:15 pm
Posts: 7
Quote:
Quote:
Hi

Would it be possible to get the runway assignment when contacting clearance?
Would help deciding which way to face the jet after push back.

Thanks
The general procedure is for ATC to clear you to push back tail left/right, nose left/right or facing North/South etc. You will only get the active runway when you report ready to taxi. Which is what already happens in PF3.The option of advising the crew which way to face at pushback has already been brought up. The problem is though that the voice set doesn't cover it very well. And, being an extra feature it's not something that can be done very quickly.
I would suggest that you look carefully at the airport chart to determine which way to face. I know that it can be a problem at complex airports. In which case if I get it wrong I plan an "escape" route if the taxi feature doesn't work. Also you don't have to taxi to the very last holding point either. I quite often jump the queue and press hotkey 6 at the holding point I arrive at.
Thanks for the explanation. I just thought it would be a nice feature. But not critical.

I mostly fly from EHAM, so I know which runway to expect depending on the winds. But with 3 north/south runways, it's sometimes a coin flip which one you get.
Not a big problem at EHAM since there's usually only one way to go when you leave the gates and you can find "escape" routes if you happen to face the wrong way.


Top
   
 Post subject: Re: Feature Requests
PostPosted: Sun Nov 19, 2017 3:17 pm 
Offline

Joined: Wed May 27, 2009 8:41 pm
Posts: 979
Location: LIMZ
Quote:
Quote:
Quote:
Hi

Would it be possible to get the runway assignment when contacting clearance?
Would help deciding which way to face the jet after push back.

Thanks
The general procedure is for ATC to clear you to push back tail left/right, nose left/right or facing North/South etc. You will only get the active runway when you report ready to taxi. Which is what already happens in PF3.The option of advising the crew which way to face at pushback has already been brought up. The problem is though that the voice set doesn't cover it very well. And, being an extra feature it's not something that can be done very quickly.
I would suggest that you look carefully at the airport chart to determine which way to face. I know that it can be a problem at complex airports. In which case if I get it wrong I plan an "escape" route if the taxi feature doesn't work. Also you don't have to taxi to the very last holding point either. I quite often jump the queue and press hotkey 6 at the holding point I arrive at.
Thanks for the explanation. I just thought it would be a nice feature. But not critical.

I mostly fly from EHAM, so I know which runway to expect depending on the winds. But with 3 north/south runways, it's sometimes a coin flip which one you get.
Not a big problem at EHAM since there's usually only one way to go when you leave the gates and you can find "escape" routes if you happen to face the wrong way.
One can always "close" runways for take-off or landing. I do that in afcad and also in PF3. Heathrow EGLL for example.

_________________
Image


Top
   
 Post subject: Re: Feature Requests
PostPosted: Wed Jan 10, 2018 6:50 pm 
Offline

Joined: Wed Sep 30, 2015 12:04 am
Posts: 31
Dave,
How easy would it be to allow the user to choose the output playback device that PF3 uses. If one has say Speakers as the default playback device, but also has USB headphones as a separate device, it would be great to be able to choose the headphones as the playback device for PF3, allowing only the SIM sound to emit from the speakers. MCE allows one to choose the output device, so I presume in software terms this could be a possibility for PF3 and would increase the reality / immersion.

Cheers,
Stuart

_________________
Cheers,
Stuart

Sim: FSXSE
OS: Windows 10 64bit
Other relavent software: MCE


Top
   
 Post subject: Re: Feature Requests
PostPosted: Fri Jan 12, 2018 2:03 pm 
Offline

Joined: Mon Sep 28, 2015 11:33 am
Posts: 60
Quote:
Dave,
How easy would it be to allow the user to choose the output playback device that PF3 uses. If one has say Speakers as the default playback device, but also has USB headphones as a separate device
Yeah, I second that one.


Top
   
 Post subject: Re: Feature Requests
PostPosted: Fri Jan 12, 2018 10:39 pm 
Offline

Joined: Mon Feb 08, 2016 9:29 pm
Posts: 332
Quote:
Quote:
Dave,
How easy would it be to allow the user to choose the output playback device that PF3 uses. If one has say Speakers as the default playback device, but also has USB headphones as a separate device
Yeah, I second that one.
This feature already is on the wishlist in the Beta Forum and I bumped that up again.

It will be looked at.

Until then you can try the freeware "Audiorouter" (you will find it via google). That program is quite buggy though and it may or may not work for you but you can give it a try.

_________________
Image


Top
   
 Post subject: Re: Feature Requests
PostPosted: Wed Feb 14, 2018 2:20 pm 
Offline

Joined: Tue Feb 09, 2010 11:19 am
Posts: 19
I don't know if it's possible, but it's winter time and many operation require de - iceing operation, I want to request ability take clarance from ATC to taxi on de - iceing pad.

Regards
Grzegorz


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 62 posts ]  Go to page Previous 13 4 5 6 7 Next

All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited