OnCourse Software

I open a new topic about this because it seems not fixed.

This is what happens :

-CP Mode 2
-All Taxi Guidance System ticked.
-After taxi clearance I push key "1" : "TGS deactivated" message ok.
-After changing the runway, 2 cases are possible.
-1/TGS re-active himself which is correct or :
-2/TGS don't re-active and display again the "TGS deactivated" message instead "TGS actived" and of course if I push the key "1" to re-activate, it don't work.

Now with no runway change, I just toggle the key "1" off and on.
-Push key "1" : "TGS deactivated" message ok.
-Push key "1" again to reactivate TGS, it never don't work. TGS stays deactivated with the same "TGS deactivated message !"

Am'I alone with this problem ? Any clue to solve that ?

Thanks in advance, Logs attached

Regards,

Richard Portier

Hi drumsart,

I have had sporadic operation with TGS in all VCP options when taxing out to a runway. But after landing it's only ever worked/re-activated once after landing and being given my taxi clearance to gate and directions.

I have tried pressing key 1 or in my case shift & F1 as I had to move the key press due to a prior key bond I have. I never get TGS to activate, I'm lucky as I have routes I fly for my VA where I know the airport layout fairly well and can get to my stand without TGS.

But I agree something isn't quite right, but I know it will be looked into and with any luck sorted out

Rob

Thanks Rob to confirm there is maybe some "glitch" there.

Regards,

Richard Portier

Hi,

Just to know if Dave is aware of this problem. I have had no response from the developer on it.

Thank you in advance,

Regards,

Richard Portier

Yes I'm aware of your post. All working fine here so I need to dig deeper

Thank you Dave for great support.

Regards,

Richard Portier

If this can help : Fsx Acc, Asn, Track Ir, PF3, Saitek Pro Flight Yoke System/Rudder/Quadrant, Windows 7U64.

Regards,

Richard Portier

Same problem here.

I have TGS activated in the options. I deactivated TGS on my way to the runway for takeoff. After landing TGS was turned off and I could not reactivate it.

First issue here of course is that reactivating does not work.

The other question in this context: Shouldn't TGS be activated automatically as defined in the options after landing even though it was manually turned off before takeoff? I asked this before but did not receive a definite answer.

Logs attached. Hope this helps.

Ralf

RALF9636 wrote:

Same problem here.

I have TGS activated in the options. I deactivated TGS on my way to the runway for takeoff. After landing TGS was turned off and I could not reactivate it.

First issue here of course is that reactivating does not work.

The other question in this context: Shouldn't TGS be activated automatically as defined in the options after landing even though it was manually turned off before takeoff? I asked this before but did not receive a definite answer.

Logs attached. Hope this helps.

Ralf

After landing TGS only becomes active if/when given taxi instructions

dmarch wrote:

After landing TGS only becomes active if/when given taxi instructions

Well I received taxi instructions, but TGS did not become active. And couldn't be activated with the hotkey.