OnCourse Software

Hi,

To change runway at departure (c/s/w) it seems that I have to unchecked the "Use TGS" option and of course I have no more guidance to the runway, even if the 3 other options are checked !?

Did I miss something ?

Thanks and Regards,

Richard Portier

You can disable/enable TGS when talking to Ground using the hotkey 1.

I noticed that the TGS is activated only after the readback of the taxi clearance. So do not readback a clearance to taxi to a runway you don't want. Instead immediately ask for a different runway.

Ralf

RALF9636 wrote:

I noticed that the TGS is activated only after the readback of the taxi clearance. So do not readback a clearance to taxi to a runway you don't want. Instead immediately ask for a different runway.

That would be even better, I just assumed he ran into the same situation I did: Taxi to runway and decide not to wait for the other 12 aircraft to depart from this runway

ThomasAH wrote:

You can disable/enable TGS when talking to Ground using the hotkey 1.

Thomas,

It don't work for me...

-CP Mode 2
-All Taxi Guidance System ticked.
-After taxi clearance I push key "1" : TGS deactivated message ok.
-Push key "c/s/w : no answer !
-Push key "1" to reactivate TGS. it don't work. TGS stays deactivated !

Thanks and Regards,

Richard Portier

ThomasAH wrote:

RALF9636 wrote:

I noticed that the TGS is activated only after the readback of the taxi clearance. So do not readback a clearance to taxi to a runway you don't want. Instead immediately ask for a different runway.

That would be even better, I just assumed he ran into the same situation I did: Taxi to runway and decide not to wait for the other 12 aircraft to depart from this runway

Ralf, Thomas,

This option also with CP Mode 1 don't work for me.

For info I'm always with the demo 3.0.2 with no pilot's voice. I attached the Logs in my previous topic viewtopic.php?f=8&t=1846 and no new about it.

Maybe is it possible the problem comes from there?

Thanks and Regards,

Richard Portier

drumsart wrote:

ThomasAH wrote:

RALF9636 wrote:

I noticed that the TGS is activated only after the readback of the taxi clearance. So do not readback a clearance to taxi to a runway you don't want. Instead immediately ask for a different runway.

That would be even better, I just assumed he ran into the same situation I did: Taxi to runway and decide not to wait for the other 12 aircraft to depart from this runway

Ralf, Thomas,

This option also with CP Mode 1 don't work for me.

For info I'm always with the demo 3.0.2 with no pilot's voice. I attached the Logs in my previous topic viewtopic.php?f=8&t=1846 and no new about it.

Maybe is it possible the problem comes from there?

Thanks and Regards,

Richard Portier

I have the full version, so it might be an issue with the demo.